UVVis Spectrometer
About the UVVis Spectrometer PCB
UVVis Spectrometer is an open source NXP PCB design by MissouriMRDT, published on GitHub. It is a 2-layer board measuring 100.3 × 26.8 mm, with 13 components from 11 distinct parts.
Its main chip is the Teensy4.1_DEV-16771, from the NXP family. Other key parts include the OKI. By type, the board carries 3 capacitors, 2 ICs, 2 diodes, 2 resistors and 1 connector.
It belongs with the science & space designs in this gallery.
Main components on the UVVis Spectrometer
UVVis Spectrometer bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy4.1_DEV-16771 | Teensy_4_1_Vertical | U1 |
| 1 | OKI | OKI_Horizontal | U3 |
| 1 | RJ45_LED_Shielded | RJ45_Teensy | J2 |
| 1 | AndersonPP | Anderson_2_Horizontal_Side_by_Side | Conn1 |
| 1 | Molex_SL_07 | MOLEX_SL_07_Horizontal | Conn3 |
| 1 | Molex_SL_03 | MOLEX_SL_03_Horizontal | Conn4 |
| 2 | LED | LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D1, D3 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 10 UF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 300 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
UVVis Spectrometer design files
The KiCad project lives in the MissouriMRDT/UVVis_Spectrometer repository on GitHub; these links point at the commit this page was built from.
UVVis Spectrometer: common questions
What microcontroller does the UVVis Spectrometer use?
The UVVis Spectrometer is built around the Teensy4.1_DEV-16771, from the NXP family.
How big is the UVVis Spectrometer PCB?
The UVVis Spectrometer measures 100.3 × 26.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UVVis Spectrometer?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the UVVis Spectrometer design files?
From the MissouriMRDT/UVVis_Spectrometer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the UVVis Spectrometer design in my own project?
The repository has no license, so all rights stay with MissouriMRDT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the UVVis Spectrometer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532