Hackrf
About the Hackrf PCB
Hackrf is an open source PCB design by MisterDr, published on GitHub under the GPL-2.0 license. It is a board measuring 38 × 7.8 mm, with 34 components from 24 distinct parts.
Other key parts include the SKY13350 and LNA. By type, the board carries 11 capacitors, 7 resistors, 5 inductors, 4 connectors, 4 diodes and 3 ICs.
From the project
HackRF One modified version to support issue while startup for custom made hardware
This is a free hardware design; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This design is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Main components on the Hackrf
Hackrf bill of materials (BOM)
34 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SKY13350 SWITCH | GSG-SOT143 | U1 |
| 1 | SKY13350 SAW | GSG-F5Q | U2 |
| 1 | LNA | GSG-TSLP-7-1 | U3 |
| 1 | 1V8 HACKRF | GSG-SMA-EDGE | P1 |
| 1 | ANTENNA | GSG-SMA-EDGE | P2 |
| 2 | CONN_1 | GSG-HOLE-62MIL-COPPER | P3, P4 |
| 2 | GSG-DIODE-TVS-BI | GSG-0402 | D1, D2 |
| 1 | PIN | GSG-SOD323 | D3 |
| 1 | LNALED | GSG-0603D | D4 |
| 2 | 39nH | GSG-0402 | L1, L4 |
| 3 | 10UH 39nH | GSG-0402 | L2, L3, L5 |
| 3 | 33PF 100pF | GSG-0402 | C1, C5, C7 |
| 1 | 10NF 100pF | GSG-0402 | C2 |
| 1 | 33PF 1nF | GSG-0402 | C3 |
| 2 | 10NF 1nF | GSG-0402 | C4, C6 |
| 1 | 22PF 100pF | GSG-0402 | C8 |
| 1 | 100NF 100pF | GSG-0402 | C9 |
| 2 | 33PF 1uF | GSG-0402 | C10, C11 |
| 1 | 470 47k | GSG-0402 | R1 |
| 1 | 470 100k | GSG-0402 | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22K 4k7 | GSG-0402 | R3 |
| 1 | 51K 100k | GSG-0402 | R4 |
| 2 | 10K 470 | GSG-0402 | R5, R7 |
| 1 | 10K 3k | GSG-0402 | R6 |
Hackrf design files
The KiCad project lives in the MisterDr/hackrf repository on GitHub; these links point at the commit this page was built from.
Hackrf: common questions
How big is the Hackrf PCB?
The Hackrf measures 38 × 7.8 mm and is 1.6 mm thick.
How many components are on the Hackrf?
34 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hackrf design files?
From the MisterDr/hackrf repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Hackrf design in my own project?
Yes, under the terms of its GPL-2.0 license, which MisterDr chose for the repository.