MiSTeX-Pmod
About the MiSTeX-Pmod PCB
MiSTeX-Pmod is an open source PCB design by MiSTeX-devel, published on GitHub under the Custom license license. It is a 4-layer board measuring 64.2 × 51.3 mm, with 26 components from 14 distinct parts.
By type, the board carries 8 diodes, 7 connectors, 7 resistors, 1 fuse, 1 switch and 1 capacitor.
It belongs with the retro computing designs in this gallery.
From the project
Hardware for MiSTeX
And the SPI bus is the SPI0 on the Raspberry Pi header:
MiSTeX-Pmod bill of materials (BOM)
26 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NASB0-S6701-TS50 Argosy Research Inc. | CONN-SMD_67P-P0.50-V_NASB0-S6701-TS50 | CN1, CN2 |
| 2 | Pmod | Pmod 2x6 | J1, J4 |
| 1 | C5117890 USB_A | USB-A-SMD_GT-USB-2004-CWG1A | J2 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CONNECTOR_USB_C_RECEPTACLE_USB2.0 Connector_USB_C_Receptacle_USB2.0 | USB-C_SMD-TYPE-C-31-M-12 | J5 |
| 1 | JK-NSMD050-30V Jinrui Electronic Materials Co. | F1206 | F1 |
| 1 | Sipeed Lichee | Sipeed Lichee | H2 |
| 1 | TS-1187A-B-A-B XKB Enterprise | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | SW1 |
| 1 | C22452 Schottky | D_SMA | D1 |
| 7 | LXES15AAA1-133 Murata Electronics | D0402-BI | D2, D3, D4, D5, D6, D7, D8 |
| 1 | 100NF 100nF | C_0402_1005Metric | C1 |
| 2 | 22R | R_0402_1005Metric | R1, R2 |
| 1 | 100R | R_0402_1005Metric | R3 |
| 4 | 47R | R_0402_1005Metric | R5, R6, R7, R8 |
MiSTeX-Pmod design files
The KiCad project lives in the MiSTeX-devel/MiSTeX-hardware repository on GitHub; these links point at the commit this page was built from.
MiSTeX-Pmod: common questions
How big is the MiSTeX-Pmod PCB?
The MiSTeX-Pmod measures 64.2 × 51.3 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the MiSTeX-Pmod?
26 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MiSTeX-Pmod design files?
From the MiSTeX-devel/MiSTeX-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MiSTeX-Pmod design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in MiSTeX-hardware
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k
Rgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k
X1
121.9 × 81.3 mm51 parts2LGPL-3.01.0k
Amiga External
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Videoslotadapter
152 × 57.6 mm13 parts2LGPL-3.01.0k