EncoderBoard
About the EncoderBoard PCB
EncoderBoard is an open source PCB design by mkousal, published on GitHub. It is a 2-layer board measuring 20 × 10 mm, with 5 components from 5 distinct parts.
Other key parts include the MH253. By type, the board carries 2 capacitors, 1 IC, 1 connector and 1 resistor.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
Supervisor: doc. Ing. Tomáš Frýza, Ph.D. Vivado Teachers: doc. Ing. Tomáš Frýza, Ph.D., Ing. Stanislav Rozum
Supervisor: doc. Ing. Tomáš Frýza, Ph.D. Vivado Teachers: doc. Ing. Tomáš Frýza, Ph.D., Ing. Stanislav Rozum
- Martin Kousal, ID= 221063 Link to GitHub project folder - Matej Ledvina, ID= 221339 Link to GitHub - Tomáš Kříčka, ID= 223283 Link to GitHub - Samuel Košík, ID= 221056 Link to GitHub
Our application uses two hall sensors for measuring speed, traveled distance, burnt calories and time (not by the hall sensor). This data is shown on four 7segment displays (one part). - Calories counting - Total time - Total distance traveled - Trip distance traveled - Speed measuring
Main components on the EncoderBoard
EncoderBoard bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MH253 | SOT-23 | U1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | 10n | C_0402_1005Metric | C1 |
| 1 | 100p | C_0402_1005Metric | C2 |
| 1 | 10k | R_0402_1005Metric | R1 |
EncoderBoard design files
The KiCad project lives in the mkousal/Digital-electronics-1-Tachometer repository on GitHub; these links point at the commit this page was built from.
EncoderBoard: common questions
How big is the EncoderBoard PCB?
The EncoderBoard measures 20 × 10 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EncoderBoard?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the EncoderBoard design files?
From the mkousal/Digital-electronics-1-Tachometer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the EncoderBoard design in my own project?
The repository has no license, so all rights stay with mkousal. Use it as a reference, and ask the author before reusing the design.
More boards in Digital-electronics-1-Tachometer
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k