3 open source boards using the MH253
Real designs built with the MH253, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
RD56
lhm0
120 × 118.5 mm263 parts4LCC-BY-NC-4.025EncoderBoard
mkousal
20 × 10 mm5 parts2LNo license0Sek Coil sphere
lhm0
140 × 140 mm43 parts2LCC-BY-NC-4.045
The MH253 in open source designs
The gallery holds 3 open source boards using the MH253 from 3 GitHub repositories; a typical one measures about 120 × 118.5 mm and carries around 43 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Sek Coil sphere by lhm0.
Parts used alongside the MH253
Microcontrollers on boards using the MH253
What boards using the MH253 are built for
MH253: common questions
Where can I find a MH253 reference design?
Each of the 3 boards on this page is a real design using the MH253. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MH253 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the MH253?
The median is 120 × 118.5 mm, and 67% are two-layer designs.
What is the most popular open source board using the MH253?
By GitHub stars, Sek Coil sphere by lhm0, with 45 stars.
Can I simulate one of these boards using the MH253 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.