HBSTEP02
mlab-modules·HBSTEP02·hw/sch_pcb/HBSTEP02A.kicad_pcb
About the HBSTEP02 PCB
HBSTEP02 is an open source PCB design by mlab-modules, published on GitHub. It is a 2-layer board measuring 60.5 × 60.5 mm, with 75 components from 41 distinct parts.
Other key parts include the TMC5130A. By type, the board carries 25 connectors, 22 capacitors, 15 resistors, 6 diodes, 4 inductors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
Stepper motor driver
Main components on the HBSTEP02
HBSTEP02 bill of materials (BOM)
75 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMC5130A | TQFP-48-1EP_7x7mm_Pitch0.5mm_TRINAMIC | U1 |
| 1 | VIO 3.3-5V | Straight_2x03 | J1 |
| 1 | REFL/STEP | Straight_1x02 | J2 |
| 1 | REFR/DIR | Straight_1x02 | J3 |
| 1 | CLK | Straight_1x02 | J4 |
| 6 | CONN1_1 | WAGO256 | J5, J6, J16, J17, J24, J25 |
| 1 | CSN/CFG3 | Straight_1x02 | J7 |
| 1 | SCK/CFG2 | Straight_1x02 | J8 |
| 1 | SID/CFG1 | Straight_1x02 | J9 |
| 1 | SDO/CFG0 | Straight_1x02 | J10 |
| 1 | ENCN/DCO | Straight_1x02 | J11 |
| 1 | ENCB/CFG4 | Straight_1x02 | J12 |
| 1 | ENCA/CFG5 | Straight_1x02 | J13 |
| 1 | SWP/DIAG1 | Straight_1x02 | J14 |
| 1 | SWN/DIAG0 | Straight_1x02 | J15 |
| 1 | POW. SEL. | Straight_1x03 | J18 |
| 1 | SDMODE | Straight_1x02 | J19 |
| 1 | DRV/CFG6 | Straight_1x02 | J20 |
| 1 | SWSEL | Straight_1x02 | J21 |
| 1 | SPIMODE | Straight_1x02 | J22 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AIN | Straight_1x02 | J23 |
| 2 | VR | C_0805 | VR1, VR2 |
| 1 | M4 | SMA_Handsoldering | D1 |
| 4 | MSS1P6 | SCHOT_D_MSS1P6 | D2, D3, D4, D5 |
| 1 | M4 | SMB_Handsoldering | D6 |
| 4 | 100nH | Inductor_4.5_4.1 | L1, L2, L3, L4 |
| 2 | 4u7 | C_0805 | C1, C6 |
| 7 | 100nF | C_0805 | C2, C3, C4, C5, C11, C13, C14 |
| 1 | 100uF/50V | C_Radial_D10_L13_P5 | C7 |
| 2 | 1nF | C_0805 | C8, C9 |
| 1 | 22n | C_0805 | C10 |
| 1 | 470nF | C_0805 | C12 |
| 4 | 470pF | C_0805 | C15, C16, C17, C18 |
| 4 | 4n7 | C_0805 | C19, C20, C21, C22 |
| 1 | 1k | R_0805 | R1 |
| 2 | 0R27 | R_1206_HandSoldering | R2, R10 |
| 4 | 10k | R_0805 | R3, R4, R9, R11 |
| 2 | 22k | R_0805 | R5, R6 |
| 1 | 3.3 | R_0805 | R7 |
| 1 | _R | R_0805_HandSoldering | R8 |
| 4 | 27 | R_0805 | R12, R13, R14, R15 |
HBSTEP02 design files
The KiCad project lives in the mlab-modules/HBSTEP02 repository on GitHub; these links point at the commit this page was built from.
HBSTEP02: common questions
How big is the HBSTEP02 PCB?
The HBSTEP02 measures 60.5 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HBSTEP02?
75 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the HBSTEP02 design files?
From the mlab-modules/HBSTEP02 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the HBSTEP02 design in my own project?
The repository has no license, so all rights stay with mlab-modules. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979