Sillyenc
mmalex·sillyenc_public·hw/sillyenc.kicad_pcb
About the Sillyenc PCB
Sillyenc is an open source WCH CH32/CH55x PCB design by mmalex, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 80 mm, with 94 components from 17 distinct parts.
Its main chip is the null, from the WCH CH32/CH55x family. Other key parts include the ITR8307. By type, the board carries 51 diodes, 22 resistors, 9 ICs, 4 switches, 2 capacitors and 1 transistor.
It belongs with the audio designs in this gallery.
From the project
cheap as possible 4 knob midi controller
this was a quick shower thought - how could we make slimline (~5mm) rotary encoders with switch, in such a way that they can be surface mounted and be as cheap as possible?
i looked at hall effect sensors, but IR was cheaper. by placing two sensors offset by a multiple of 1/12th of a turn, plus 1/24th of a turn, they end up reading the reflected light above them in quadrature. they use the ADC pins of the microcontroller so we actually get a nice analogue 'sinewave' as you spin the wheel, allowing you to do atan2() on the two levels to get an accurate angle at much finer resolution than…

Main components on the Sillyenc
Sillyenc bill of materials (BOM)
94 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | null CH32X035G8U6 null | QFN-28_L4.0-W4.0-P0.40-BL-EP2.8 | U1 |
| 8 | ITR8307 | OPTO-SMD_ITR8307-S18-TR8-B | U2, U3, U4, U5, U6, U7, U8, U9 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | C393939 USB-C 16P | USB-C-SMD_TYPE-C16PIN | J1 |
| 4 | M2X5 M2x5 | Standoff_SMT_M2x5_BSMTWEM250STR | H1, H2, H3, H4 |
| 4 | TS-1187A | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1, SW2, SW3, SW4 |
| 1 | SD103AW | D_SOD-123 | D1 |
| 2 | H5VS10BC | DFN1006-2L-BI | D2, D3 |
| 48 | C2286 red | LED_0603_1608Metric | D10, D11, D12, D13, D14, D15, D16, D17 +40 |
| 1 | 4.7U 4.7u | C_0402_1005Metric | C1 |
| 1 | 100N 100n | C_0402_1005Metric | C2 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 4 | 220 | R_0402_1005Metric | R3, R4, R5, R6 |
| 8 | 10K 10k | R_0402_1005Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R15 |
| 1 | 1k | R_0402_1005Metric | R16 |
| 6 | 330 | R_0402_1005Metric | R17, R18, R19, R20, R21, R22 |
Sillyenc design files
The KiCad project lives in the mmalex/sillyenc_public repository on GitHub; these links point at the commit this page was built from.
- Layouthw/sillyenc.kicad_pcb
- Schematichw/sillyenc.kicad_sch
- BOMhw/production/bom.csv
Sillyenc: common questions
What microcontroller does the Sillyenc use?
The Sillyenc is built around the null, from the WCH CH32/CH55x family.
How big is the Sillyenc PCB?
The Sillyenc measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sillyenc?
94 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sillyenc design files?
From the mmalex/sillyenc_public repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sillyenc design in my own project?
Yes, under the terms of its MIT license, which mmalex chose for the repository.
Can I test firmware for the Sillyenc without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.
Similar boards
WCH CH32/CH55x
Ps2usb
rasteri
40 × 55 mm25 parts2LNo license428WCH CH32/CH55x
CH32X-48
rgoulter
224.6 × 74.2 mm112 parts2LNo license230WCH CH32/CH55x
CH552-48
rgoulter
224.6 × 74.2 mm107 parts2LNo license230WCH CH32/CH55x
CH32X-60-ANSI-Improved
rgoulter
285 × 94.2 mm149 parts2LNo license230WCH CH32/CH55x
CH32X-75
rgoulter
285 × 94.2 mm318 parts2LNo license230WCH CH32/CH55x
Webusb programmer rev6
laneboysrc
38 × 20 mm18 parts2LMIT87