STM32-Custom-KiCad board

mmalikmo07·STM32-Custom-KiCad-board

STM32-Custom-KiCad board layout, top view — open source STM32 board by mmalikmo07

About the STM32-Custom-KiCad board

STM32-Custom-KiCad board is an open source STM32 PCB design by mmalikmo07, published on GitHub. It is a 2-layer board measuring 45.4 × 39.9 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

A 2-layer, 45 × 40 mm development board built around the STM32F103C8T6 (Arm Cortex-M3, 72 MHz), designed in KiCad 9 from schematic through layout to Gerbers. It's powered and programmed over USB, with SWD for debugging and breakout headers for UART and I²C.

A 2-layer, 45 × 40 mm development board built around the STM32F103C8T6 (Arm Cortex-M3, 72 MHz), designed in KiCad 9 from schematic through layout to Gerbers. It's powered and programmed over USB, with SWD for debugging and breakout headers for UART and I²C.

This was my first full board. It began as a guided KiCad tutorial build, which is why the files are named KiCad-STM32-tut. Below are the design choices and what I'd change in the next revision.

STM32-Custom-KiCad board, from the project README
From the project README

Main components on the STM32-Custom-KiCad board

STM32-Custom-KiCad board bill of materials (BOM)

28 components, 16 distinct parts.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
16MHz
Y1
1
USB_B_Micro
J1
3
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
RED
D1
1
120R
FB1
5
100n
C1, C2, C3, C4, C9
1
10u
C5
1
10n
C6
2
1u
C7, C8
2
10p
C10, C11
2
22u
C12, C13
1
10k
R1
4
1k5
R2, R3, R4, R5

STM32-Custom-KiCad board design files

The KiCad project lives in the mmalikmo07/STM32-Custom-KiCad-board repository on GitHub; these links point at the commit this page was built from.

STM32-Custom-KiCad board: common questions

What microcontroller does the STM32-Custom-KiCad board use?

The STM32-Custom-KiCad board is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32-Custom-KiCad board?

The STM32-Custom-KiCad board measures 45.4 × 39.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Custom-KiCad board?

28 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-Custom-KiCad board design files?

From the mmalikmo07/STM32-Custom-KiCad-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32-Custom-KiCad board design in my own project?

The repository has no license, so all rights stay with mmalikmo07. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Custom-KiCad board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards