PCB COM
MOAalpha·2425_Projet1AB_SIMU4DX·Hardware/PCB_Com/PCB_COM.kicad_pcb
About the PCB COM
PCB COM is an open source STM32 PCB design by MOAalpha, published on GitHub. It is a 4-layer board measuring 42 × 42 mm, with 40 components from 17 distinct parts.
Its main chip is the STM32G474RETx, from the STM32 family. Other key parts include the AZ1117CH2-3.3TRG1 and USBLC6-2SC6. By type, the board carries 15 resistors, 11 capacitors, 6 connectors, 3 ICs, 3 diodes and 2 switches.
From the project
A super nice projet
L'objectif de ce projet est de reconstituer un simulateur de voiture permettant de ressentir les vraies sensations de conduite, avec un frein à retour de force et 4 pieds movibles.
On s'inspire du projet : https://github.com/ChrGri/DIY-Sim-Racing-FFB-Pedal
La base ayant déjà été faite, on souhaite modifier le châssis et les pédales de frein afin d'augmenter la sensation de conduire une véritable voiture.
Main components on the PCB COM
PCB COM bill of materials (BOM)
40 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G474RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AZ1117CH2-3.3TRG1 | SOT-223 | U2 |
| 1 | USBLC6-2SC6 USBLC6-2SC6 | SOT-23-6 | U3 |
| 5 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1, J2, J4, J5, J6 |
| 1 | 629722000214 | PinHeader_2x07_P1.27mm_Vertical_SMD | J3 |
| 2 | SW_Push | 430152043826 | SW1, SW2 |
| 2 | LED_RED | LED_0603_1608Metric | D1, D3 |
| 1 | LED_GREEN | LED_0603_1608Metric | D2 |
| 1 | 4u7 | C_0603_1608Metric | C1 |
| 7 | 100n | C_0402_1005Metric | C2, C3, C4, C6, C7, C8, C9 |
| 1 | 10n | C_0402_1005Metric | C5 |
| 1 | 10u | C_0603_1608Metric | C10 |
| 1 | 22u | C_0805_2012Metric | C11 |
| 2 | 10k | R_0402_1005Metric | R1, R2 |
| 3 | 1k | R_0402_1005Metric | R3, R12, R13 |
| 8 | 330 | R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 2 | 5k1 | R_0402_1005Metric | R14, R15 |
PCB COM design files
The KiCad project lives in the MOAalpha/2425_Projet1AB_SIMU4DX repository on GitHub; these links point at the commit this page was built from.
PCB COM: common questions
What microcontroller does the PCB COM use?
The PCB COM is built around the STM32G474RETx, from the STM32 family.
How big is the PCB COM?
The PCB COM measures 42 × 42 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PCB COM?
40 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB COM design files?
From the MOAalpha/2425_Projet1AB_SIMU4DX repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB COM design in my own project?
The repository has no license, so all rights stay with MOAalpha. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB COM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 2425_Projet1AB_SIMU4DX
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k