HardLabs

DispBrd DISP 6dW

MobiFlight·mobiflight-panels·pcb-modules/max-displays/Modular/DispBrd_DISP/DispBrd_DISP_6dW/DispBrd_DISP_6dW.kicad_pcb

DispBrd DISP 6dW PCB layout, top view — open source board by MobiFlight

About the DispBrd DISP 6dW PCB

DispBrd DISP 6dW is an open source PCB design by MobiFlight, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54.4 × 14.7 mm, with 6 components from 3 distinct parts.

By type, the board carries 1 connector and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

A repository with open source panel designs for flight simulation.

There are two types of designs: One-piece and Modular. The former is a complete panel, the latter has a separate driver board that fits any of the different display carrier boards.

(*) The resistor value might have to be adjusted according to the displays used in order to obtain the desired brightness; please refer to the MAX7219 datasheet for further details.

DispBrd DISP 6dW, from the project README
From the project README

DispBrd DISP 6dW bill of materials (BOM)

6 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Disp6
P7
4
MountingHole
H7, H8, H9, H10
1
LEDDSP6_CA
S5

DispBrd DISP 6dW design files

The KiCad project lives in the MobiFlight/mobiflight-panels repository on GitHub; these links point at the commit this page was built from.

DispBrd DISP 6dW: common questions

How big is the DispBrd DISP 6dW PCB?

The DispBrd DISP 6dW measures 54.4 × 14.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DispBrd DISP 6dW?

6 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DispBrd DISP 6dW design files?

From the MobiFlight/mobiflight-panels repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DispBrd DISP 6dW design in my own project?

Yes, under the terms of its GPL-3.0 license, which MobiFlight chose for the repository.

More boards in mobiflight-panels

Similar boards