HardLabs

FSP-Display6S

MobiFlight·mobiflight-panels·pcb-modules/max-displays/OnePiece/FSP_Display6S-MAX/FSP-Display6S.kicad_pcb

FSP-Display6S PCB layout, top view — open source board by MobiFlight

About the FSP-Display6S PCB

FSP-Display6S is an open source PCB design by MobiFlight, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49.8 × 24.3 mm, with 10 components from 10 distinct parts.

Other key parts include the MAX7219CNG. By type, the board carries 3 connectors, 2 capacitors, 1 IC, 1 jumper, 1 diode and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

A repository with open source panel designs for flight simulation.

There are two types of designs: One-piece and Modular. The former is a complete panel, the latter has a separate driver board that fits any of the different display carrier boards.

(*) The resistor value might have to be adjusted according to the displays used in order to obtain the desired brightness; please refer to the MAX7219 datasheet for further details.

FSP-Display6S, from the project README
From the project README

Main components on the FSP-Display6S

MAX7219CNG

FSP-Display6S bill of materials (BOM)

10 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX7219CNG
IC1
1
PWR
P1
1
CONN-6
P2
1
PWR
P11
1
LEDDSP6_CK
DP1
1
JUMPER2
JP1
1
1N5819
D1
1
100uF 16V
C1
1
100nF
C2
1
10k
R1

FSP-Display6S design files

The KiCad project lives in the MobiFlight/mobiflight-panels repository on GitHub; these links point at the commit this page was built from.

FSP-Display6S: common questions

How big is the FSP-Display6S PCB?

The FSP-Display6S measures 49.8 × 24.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FSP-Display6S?

10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FSP-Display6S design files?

From the MobiFlight/mobiflight-panels repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FSP-Display6S design in my own project?

Yes, under the terms of its GPL-3.0 license, which MobiFlight chose for the repository.

More boards in mobiflight-panels

Similar boards