HardLabs

Cc hw arduino shield

mod-audio·cc-hw-arduino-shield·hw-design/board/control-chain-arduino-shield.kicad_pcb

Cc hw arduino shield layout, top view — open source AVR/Arduino board by mod-audio

About the Cc hw arduino shield

Cc hw arduino shield is an open source AVR/Arduino PCB design by mod-audio, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 41 components from 23 distinct parts.

Its main chip is the Hole, from the AVR/Arduino family. Other key parts include the ISL83491. By type, the board carries 19 connectors, 8 resistors, 5 diodes, 4 capacitors, 3 transistors and 1 IC.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

MOD Arduino Shield hardware repository.

control-chain-arduino-shield ============================

This repository contains the schematics and PCB design files for Control Chain Arduino Shield hardware. It serves as a way for people to create new peripheral to be used in conjunction with MOD (http://moddevices.com/) via its Control Chain interface.

These files were created and can be improved with KiCAD, a free software Electronics CAD which is available at http://www.kicad.org/

Main components on the Cc hw arduino shield

ISL83491

Cc hw arduino shield bill of materials (BOM)

41 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ISL83491
U1
2
2N7002
Q1, Q2
1
IRFML8244TRPBF
Q4
1
CC_MAIN
J1
1
CC_NEXT
J2
2
Power
P1, P10
2
Analog
P2, P11
2
Digital
P3, P12
2
Digital
P4, P13
4
Hole
P5, P6, P7, P8
2
~
P9, P14
3
~
P19, P20, P21
1
PTC_FUSE
RT1
1
CGRA4007-G
D1
1
LED
D2
3
1N4148
D3, D4, D5
1
10uF
C1
2
100nF
C2, C3
1
10uF
C4
1
330R
R1
Show 3 more
QtyPartRefs
5
10K
R2, R4, R8, R10, R11
1
220K
R3
1
100R
R9

Cc hw arduino shield design files

The KiCad project lives in the mod-audio/cc-hw-arduino-shield repository on GitHub; these links point at the commit this page was built from.

Cc hw arduino shield: common questions

What microcontroller does the Cc hw arduino shield use?

The Cc hw arduino shield is built around the Hole, from the AVR/Arduino family.

How big is the Cc hw arduino shield?

The Cc hw arduino shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cc hw arduino shield?

41 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cc hw arduino shield design files?

From the mod-audio/cc-hw-arduino-shield repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Cc hw arduino shield design in my own project?

The repository has no license, so all rights stay with mod-audio. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cc hw arduino shield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards