HardLabs

Glider 34P-A Adapter

Modos-Labs·Glider·pcb/34p-adapter-a/adapter.kicad_pcb

Glider 34P-A Adapter PCB layout, top view — open source board by Modos-Labs

About the Glider 34P-A Adapter PCB

Glider 34P-A Adapter is an open source PCB design by Modos-Labs, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 45 × 41 mm, with 6 components from 3 distinct parts.

By type, the board carries 4 resistors and 2 connectors.

It belongs with the displays & leds designs in this gallery.

From the project

Open-source E-ink monitor. Mirror of https://gitlab.com/zephray/glider

Open-source Eink monitor with an emphasis on low latency.

Note: This repo only contains the hardware design, the gateware running on the FPGA is my open-source Caster EPDC design. This README also contains information about the Caster as well.

This is a long document, containing not just information about this project, but also pretty much everything I know about Eink. Given it's a bit hard to gather information about Eink online, I think this is the right thing to do. Use the following table of contents to navigate around.

Glider 34P-A Adapter, from the project README
From the project README

Glider 34P-A Adapter bill of materials (BOM)

6 components, 3 distinct parts.

QtyPartRefs
1
FPC-05F-50PH20
J3
1
FH34SRJ-34S-0.5SH
J5
4
33
RN1, RN2, RN5, RN6

Glider 34P-A Adapter design files

The KiCad project lives in the Modos-Labs/Glider repository on GitHub; these links point at the commit this page was built from.

Glider 34P-A Adapter: common questions

How big is the Glider 34P-A Adapter PCB?

The Glider 34P-A Adapter measures 45 × 41 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Glider 34P-A Adapter?

6 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Glider 34P-A Adapter design files?

From the Modos-Labs/Glider repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Glider 34P-A Adapter design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Modos-Labs chose for the repository.

More boards in Glider

Similar boards