PassPress STM
mohamed-bekheet·PassPress·passpress-hardware/PassPress_kicad_STM/PassPress_STM.kicad_pcb
About the PassPress STM PCB
PassPress STM is an open source STM32 PCB design by mohamed-bekheet, published on GitHub. It is a 4-layer board measuring 42.6 × 19.1 mm, with 34 components from 20 distinct parts.
Its main chip is the STM32F042G6U6TR, from the STM32 family. Other key parts include the XC6220B331ER-G. By type, the board carries 13 resistors, 8 capacitors, 6 test points, 4 diodes, 2 ICs and 1 connector.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Welcome to the PassPress Hardware design repository. This directory contains the complete electronic engineering files for the PassPress hardware device, including KiCad schematics, PCB layout files, component libraries, datasheet references, and Bill of Materials (BOM).
Welcome to the PassPress Hardware design repository. This directory contains the complete electronic engineering files for the PassPress hardware device, including KiCad schematics, PCB layout files, component libraries, datasheet references, and Bill of Materials (BOM).
Each KiCad project directory contains structured schematic sheets for specific hardware functional blocks:
Main components on the PassPress STM
PassPress STM bill of materials (BOM)
34 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6220B331ER-G | XC6220B331ER-G | IC2 |
| 1 | STM32F042G6U6TR | QFN-28_4x4mm_P0.5mm | U1 |
| 1 | U261-241N-4BS60 | XKB_U261-241N-4BS60_USB_C | J1 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_1_7mm | TP11 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_2_7mm | TP12 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_3_7mm | TP13 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_4_7mm | TP14 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_5_7mm | TP15 |
| 1 | TOUCH_PAD_1 | TOUCH_PAD_6_7mm | TP16 |
| 1 | PESD5V0V1BL,315 | D_SOD-882D | D2 |
| 1 | LED-G | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D4 |
| 1 | LED-R | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D5 |
| 1 | PRTR5V0U2F,115 | PESD3V3L5UF115 | D7 |
| 3 | 4.7UF 4.7uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C20 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C15 |
| 2 | 10N 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8 |
| 1 | 22UF 22uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13 |
| 2 | 220R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R14 |
| 8 | 5.1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R6, R7, R8, R9, R10, R11, R12 |
| 3 | 10K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4, R5 |
PassPress STM design files
The KiCad project lives in the mohamed-bekheet/PassPress repository on GitHub; these links point at the commit this page was built from.
PassPress STM: common questions
What microcontroller does the PassPress STM use?
The PassPress STM is built around the STM32F042G6U6TR, from the STM32 family.
How big is the PassPress STM PCB?
The PassPress STM measures 42.6 × 19.1 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the PassPress STM?
34 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PassPress STM design files?
From the mohamed-bekheet/PassPress repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PassPress STM design in my own project?
The repository has no license, so all rights stay with mohamed-bekheet. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PassPress STM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PassPress
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k