HardLabs

PassPress kicad Combined

mohamed-bekheet·PassPress·passpress-hardware/PassPress_kicad_Combined/PassPress_kicad_Combined/PassPress_kicad_Combined.kicad_pcb

PassPress kicad Combined PCB layout, top view — open source ESP32 board by mohamed-bekheet

About the PassPress kicad Combined PCB

PassPress kicad Combined is an open source ESP32 PCB design by mohamed-bekheet, published on GitHub. It is a 4-layer board measuring 47.4 × 21.3 mm, with 57 components from 33 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the MCP73831T-2ACI/MC and XC6220B331ER-G. By type, the board carries 20 capacitors, 18 resistors, 6 test points, 4 diodes, 3 ICs and 3 inductors.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

Welcome to the PassPress Hardware design repository. This directory contains the complete electronic engineering files for the PassPress hardware device, including KiCad schematics, PCB layout files, component libraries, datasheet references, and Bill of Materials (BOM).

Welcome to the PassPress Hardware design repository. This directory contains the complete electronic engineering files for the PassPress hardware device, including KiCad schematics, PCB layout files, component libraries, datasheet references, and Bill of Materials (BOM).

Each KiCad project directory contains structured schematic sheets for specific hardware functional blocks:

Main components on the PassPress kicad Combined

MCP73831T-2ACI/MCXC6220B331ER-GESP32-S3

PassPress kicad Combined bill of materials (BOM)

57 components, 33 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP73831T-2ACI/MC
MCP73831T-2ACI_MC
IC1
1
XC6220B331ER-G
IC2
1
ESP32-S3
U6
1
40MHZ
X1
1
USB_C_GT-USB-8012A
J1
1
2450AT18A100E
AE1
1
TOUCH_PAD_1
TP11
1
TOUCH_PAD_1
TP12
1
TOUCH_PAD_1
TP13
1
TOUCH_PAD_1
TP14
1
TOUCH_PAD_1
TP15
1
TOUCH_PAD_1
TP16
1
PESD3V3L1BAF
D1
2
LED
D2, D3
1
PRTR5V0U2F,115
D7
1
2n
L1
1
24NH
24nH
L2
1
2.7NH
2.7nH
L3
2
10UF
10uF
C1, C3
2
0.1UF
0.1uF
C2, C14
Show 13 more
QtyPartRefs
3
0.1U
0.1u
C4, C7, C9
4
1u
C5, C6, C11, C21
1
10N
10n
C8
1
0.1U
0.1uF
C10
1
22UF
22uF
C13
2
22PF
22pF
C15, C16
2
1.5PF
1.5pF
C17, C18
2
4.7UF
4.7uF
C20, C23
2
5.1K
R1, R2
5
10K
R3, R4, R7, R8, R18
2
22R
R5, R6
7
510R
R9, R10, R11, R12, R13, R14, R15
2
220R
R16, R17

PassPress kicad Combined design files

The KiCad project lives in the mohamed-bekheet/PassPress repository on GitHub; these links point at the commit this page was built from.

PassPress kicad Combined: common questions

What microcontroller does the PassPress kicad Combined use?

The PassPress kicad Combined is built around the ESP32-S3, from the ESP32 family.

How big is the PassPress kicad Combined PCB?

The PassPress kicad Combined measures 47.4 × 21.3 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the PassPress kicad Combined?

57 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PassPress kicad Combined design files?

From the mohamed-bekheet/PassPress repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PassPress kicad Combined design in my own project?

The repository has no license, so all rights stay with mohamed-bekheet. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PassPress kicad Combined without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PassPress

Similar boards