HardLabs

2425 ESE Projet V-NOM

MohamedBenabdelhadi·2425_ESE_Projet_V-NOM·Pojet_V-NOM_KiCAD/Pojet_V-NOM_KiCAD.kicad_pcb

2425 ESE Projet V-NOM PCB layout, top view — open source STM32 board by MohamedBenabdelhadi

About the 2425 ESE Projet V-NOM PCB

2425 ESE Projet V-NOM is an open source STM32 PCB design by MohamedBenabdelhadi, published on GitHub. It is a 4-layer board measuring 57 × 54 mm, with 58 components from 37 distinct parts.

Its main chip is the STM32G431CBU6, from the STM32 family. Other key parts include the MP1475SGJ-P, ADXL343 and ZXBM5210-SP. By type, the board carries 26 capacitors, 11 resistors, 7 connectors, 5 ICs, 2 switches and 2 diodes.

From the project

Mohamed Benabdelhadi_Nouhaila Faris_Oliver Belliard_Valerian Priou

Ce projet consiste à créer un robot capable de jouer au chat et la souris avec d'autres robots du même type. Ils joueront sur une table sans bordures et devront donc être capable de détecter les bords de celle-ci. Les élèves sont chargés de réaliser les schémas électroniques, le routage et la configuration des différents composants choisis pour réaliser ce projet. Celui-ci est piloté par un microcontrôleur de type STM32.

2425 ESE Projet V-NOM, from the project README
From the project README

Main components on the 2425 ESE Projet V-NOM

MP1475SGJ-PSTM32G431CBU6ADXL343ZXBM5210-SP

2425 ESE Projet V-NOM bill of materials (BOM)

58 components, 37 distinct parts.

QtyPartRefs
1
MP1475SGJ-P
IC1002
1
STM32G431CBU6
U1
1
ADXL343
U2
2
ZXBM5210-SP
U701, U801
1
16 MHz
Y1
1
Conn_ST_STDC14
J1
1
Conn_01x08
J3
2
Conn_01x03
J4, J5
1
Switch ON/OFF
J6
2
Conn_01x06
J301, J302
1
+7.2V
BT1
1
BU33SD5WG-TR
PS901
2
SW_Push
SW501, SW502
1
GREEN
D1
1
RED
D2
1
39nH
L1
1
4.7 uH
L1002
2
10p
C1, C2
1
10 uF
C3
4
0.1 uF
C4, C1011, C1013, C1014
Show 17 more
QtyPartRefs
7
100nF
C5, C6, C7, C202, C203, C501, C502
1
4.7uF
C8
1
10nF
C201
4
1uF
C701, C801, C901, C902
2
10uF
C702, C802
1
15 pF
C1008
3
22 uF
C1009, C1010, C1012
1
10
R1
1
100
R2
1
1.3k
R3
2
470k
R501, R502
1
16 k
R1007
1
40.2 k
R1008
1
7.68 k
R1009
1
100 k
R1010
1
20
R1011
1
100k
R1012

2425 ESE Projet V-NOM design files

The KiCad project lives in the MohamedBenabdelhadi/2425_ESE_Projet_V-NOM repository on GitHub; these links point at the commit this page was built from.

2425 ESE Projet V-NOM: common questions

What microcontroller does the 2425 ESE Projet V-NOM use?

The 2425 ESE Projet V-NOM is built around the STM32G431CBU6, from the STM32 family.

How big is the 2425 ESE Projet V-NOM PCB?

The 2425 ESE Projet V-NOM measures 57 × 54 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 2425 ESE Projet V-NOM?

58 components, from 37 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2425 ESE Projet V-NOM design files?

From the MohamedBenabdelhadi/2425_ESE_Projet_V-NOM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 2425 ESE Projet V-NOM design in my own project?

The repository has no license, so all rights stay with MohamedBenabdelhadi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2425 ESE Projet V-NOM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards