12V-4A-buck converter
MohamedHassanExp·12V-4A-buck-converter
About the 12V-4A-buck converter PCB
12V-4A-buck converter is an open source PCB design by MohamedHassanExp, published on GitHub under the MIT license. It is a 2-layer board measuring 29.9 × 66.7 mm, with 26 components from 24 distinct parts.
Other key parts include the UC3842_SOIC16. By type, the board carries 10 resistors, 9 capacitors, 2 transistors, 2 connectors, 1 IC and 1 diode.
It belongs with the power & battery and test & measurement designs in this gallery.
From the project
DC-DC buck converter that utilizes Texas instruments UC3842 IC to drive a 12V load with up to 4A of current from a source voltage up to 30V.
A custom-designed printed circuit board (PCB) for a 12V, 4A step-down (buck) power converter, featuring full schematic capture, layout, and manufacturing-ready fabrication files.
This project contains the complete hardware design files for a DC-DC buck converter capable of delivering 4 amps at 12 volts. It serves as a power supply module for embedded systems and custom electronics requiring efficient voltage step-down regulation.
Main components on the 12V-4A-buck converter
12V-4A-buck converter bill of materials (BOM)
26 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UC3842_SOIC16 | SOIC-16W_7.5x10.3mm_P1.27mm | U1 |
| 1 | VND7NV04 | TO-252-2 | Q1 |
| 1 | BC818W | SOT-323_SC-70 | Q3 |
| 1 | VIN | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | VOUT | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | V6PWL45 | TO-252-2_TabPin1 | D2 |
| 1 | 180U 180u | L_Toroid_Vertical_L24.6mm_W15.5mm_P11.44mm_Pulse_KM-4 | L1 |
| 2 | 68U 68u | C_Elec_8x10.2 | C1, C9 |
| 1 | 220U 220u | C_Elec_6.3x7.7 | C2 |
| 1 | 2.2N 2.2n | C_0402_1005Metric | C3 |
| 1 | 22N 22n | C_0805_2012Metric | C4 |
| 1 | 0U24 0u24 | C_1206_3216Metric | C5 |
| 1 | 4n | C_0603_1608Metric | C6 |
| 1 | 0U1 0u1 | C_0805_2012Metric | C7 |
| 1 | 10N 10n | C_0603_1608Metric | C8 |
| 1 | 38K 38k | R_1210_3225Metric | R1 |
| 1 | 8k | R_0603_1608Metric | R2 |
| 1 | 10K 10k | R_1210_3225Metric | R3 |
| 2 | 2K2 2k2 | R_1210_3225Metric | R4, R8 |
| 1 | 6m | R_1210_3225Metric | R5 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 800 | R_0603_1608Metric | R6 |
| 1 | 200M 200m | R_2816_7142Metric | R7 |
| 1 | 3K3 3k3 | R_0603_1608Metric | R9 |
| 1 | 330 | R_0603_1608Metric | R10 |
12V-4A-buck converter design files
The KiCad project lives in the MohamedHassanExp/12V-4A-buck-converter repository on GitHub; these links point at the commit this page was built from.
12V-4A-buck converter: common questions
How big is the 12V-4A-buck converter PCB?
The 12V-4A-buck converter measures 29.9 × 66.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 12V-4A-buck converter?
26 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 12V-4A-buck converter design files?
From the MohamedHassanExp/12V-4A-buck-converter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 12V-4A-buck converter design in my own project?
Yes, under the terms of its MIT license, which MohamedHassanExp chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k