STM-board
MohamedHassanExp·STM-board
About the STM-board
STM-board is an open source STM32 PCB design by MohamedHassanExp, published on GitHub under the MIT license. It is a 4-layer board measuring 48.6 × 40.6 mm, with 46 components from 35 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the MP2359DJ and USBLC6-2SC6. By type, the board carries 16 capacitors, 11 resistors, 5 connectors, 4 diodes, 3 ICs and 3 inductors.
From the project
A custom-designed printed circuit board (PCB) for an STM32 microcontroller, featuring full schematic capture, layout, and manufacturing-ready fabrication files.
A custom-designed printed circuit board (PCB) for an STM32 microcontroller, featuring full schematic capture, layout, and manufacturing-ready fabrication files.
This project contains the complete hardware design files for a custom STM32-based development board. It serves as a physical hardware platform for embedded C programming, control systems testing, and peripheral integration. The board was routed with a focus on signal integrity, proper grounding, and efficient power distribution.
Main components on the STM-board
STM-board bill of materials (BOM)
46 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2359DJ | SOT-23-6 | U1 |
| 1 | STM32F405RGTX STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | input | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | SWD | PinHeader_2x05_P1.00mm_Vertical | J2 |
| 2 | CONN_01X04 Conn_01x04 | Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J4 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J5 |
| 1 | 250MA 250mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 2 | B5819W | D_SOD-123 | D1, D2 |
| 1 | RED | LED_0201_0603Metric | D3 |
| 1 | BLUE | LED_0201_0603Metric | D4 |
| 1 | 600@600MHz | L_0805_2012Metric | FB1 |
| 1 | 10U 10u | L_Sunlord_MWSA0518S | L1 |
| 1 | 39N 39n | L_0402_1005Metric | L2 |
| 3 | 10U 10u | C_1206_3216Metric | C1, C3, C4 |
| 1 | 10N 10n | C_0603_1608Metric | C2 |
| 1 | 4U7 4u7 | C_0603_1608Metric | C5 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100N 100n | C_0402_1005Metric | C6, C7, C8, C9, C10 |
| 1 | 1u | C_0402_1005Metric | C11 |
| 1 | 10N 10n | C_0402_1005Metric | C12 |
| 2 | 2U2 2u2 | C_0201_0603Metric | C13, C14 |
| 2 | 12P 12p | C_0402_1005Metric | C15, C16 |
| 1 | 47K 47k | R_0603_1608Metric | R1 |
| 1 | 15K 15k | R_0603_1608Metric | R2 |
| 1 | 100K 100k | R_0603_1608Metric | R3 |
| 1 | 1K | R_0603_1608Metric | R4 |
| 1 | 270 | R_0603_1608Metric | R5 |
| 1 | 68K 68k | R_0603_1608Metric | R6 |
| 2 | 2K2 2k2 | R_0402_1005Metric | R7, R8 |
| 1 | 1K5 | R_0603_1608Metric | R9 |
| 1 | 10K 10k | R_0402_1005Metric | R10 |
| 1 | 47 | R_0402_1005Metric | R11 |
STM-board design files
The KiCad project lives in the MohamedHassanExp/STM-board repository on GitHub; these links point at the commit this page was built from.
- Layoutstm board.kicad_pcb
- Schematicstm board.kicad_sch
- BOMManufacturing/stm board-BOM.csv
STM-board: common questions
What microcontroller does the STM-board use?
The STM-board is built around the STM32F405RGTX, from the STM32 family.
How big is the STM-board?
The STM-board measures 48.6 × 40.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM-board?
46 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM-board design files?
From the MohamedHassanExp/STM-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM-board design in my own project?
Yes, under the terms of its MIT license, which MohamedHassanExp chose for the repository.
Can I test firmware for the STM-board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k