Splitboard left
Mona-zza·Split·PCB/splitboard left.kicad_pcb
About the Splitboard left PCB
Splitboard left is an open source PCB design by Mona-zza, published on GitHub. It is a 2-layer board measuring 183.6 × 158.3 mm, with 129 components from 7 distinct parts.
Other key parts include the Adafruit_Feather_Generic. By type, the board carries 52 inductors, 38 switches, 38 diodes and 1 module.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
The keyboard uses a split layout with around 76 keys, The design is meant to be customizable and DIY-friendly. It uses Kailh hot-swap sockets, which means switches can be replaced anytime without needing to desolder them. This makes it easy to experiment with different switches l
The keyboard uses a split layout with around 76 keys, The design is meant to be customizable and DIY-friendly. It uses Kailh hot-swap sockets, which means switches can be replaced anytime without needing to desolder them. This makes it easy to experiment with different switches later. For the controller, I used the nRF52840 development board, which works well with ZMK firmware. ZMK alows the keyboard to support Bluetooth, so it can be used wirelessly. It also support customizable keymaps, layers, and other advanced keyboard features.
Main components on the Splitboard left
Splitboard left bill of materials (BOM)
129 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Adafruit_Feather_Generic | Adafruit_Feather | A1 |
| 5 | SW_Push | SW_Hotswap_Kailh_MX_1.50u | SW1, SW8, SW15, SW21, SW22 |
| 30 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW2, SW3, SW4, SW5, SW6, SW7, SW9, SW10 +22 |
| 1 | SW_Push | SW_Hotswap_Kailh_MX_1.50u_90deg | SW14 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_2.00u | SW34, SW35 |
| 38 | 1N4148 | DO35-7 | D1, D2, D3, D4, D5, D6, D7, D8 +30 |
| 52 | WS2812B | BAcklight | L1, L2, L3, L4, L5, L6, L7, L8 +44 |
Splitboard left design files
The KiCad project lives in the Mona-zza/Split repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/splitboard left.kicad_pcb
- SchematicPCB/splitboard left.kicad_sch
Splitboard left: common questions
How big is the Splitboard left PCB?
The Splitboard left measures 183.6 × 158.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Splitboard left?
129 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Splitboard left design files?
From the Mona-zza/Split repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Splitboard left design in my own project?
The repository has no license, so all rights stay with Mona-zza. Use it as a reference, and ask the author before reusing the design.