29 open source boards using the Adafruit_Feather_Generic
Real designs built with the Adafruit_Feather_Generic, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Bubby
mikeysklar
79.9 × 46.4 mm9 parts2LNo license30AVR/Arduino
SHARP FEATHER NANO
bitbank2
43.9 × 53.1 mm12 parts2LApache-2.016Automatic weather station
cryologger
133.4 × 79.4 mm18 parts2LGPL-3.015Ice tracking beacon
cryologger
133 × 63 mm14 parts2LGPL-3.010NXP
Teensy display shield
AnthonyDiGirolamo
179.3 × 66 mm50 parts4LApache-2.04Preamp
bengineer91
160 × 100 mm358 parts4LNo license2Drop-Ceiling-Controller
npuckett
146 × 110 mm74 parts2LNo license1ArduLogger
sbeddes
90.5 × 99 mm21 parts2LNo license1RP2040/RP2350
Iso adc cvm
OisinS13
123.3 × 143.8 mm175 parts2LGPL-3.00Splitboard left
Mona-zza
183.6 × 158.3 mm129 parts2LNo license0Splitboard left
CHAPARII
183.6 × 158.3 mm129 parts2LNo license0Nordic nRF
Treeboard
compressedfish
85 × 85 mm102 parts4LMIT0Mobile-Robot
ljparrish
99.1 × 73.7 mm87 parts2LNo license0CapSenseQuadro
drbz-zhou
30 × 51.3 mm76 parts2LNo license0Pcbdraft-2
MikeL270
115.3 × 101.6 mm26 parts2LMIT0Phys-427
AlnisS
22.9 × 50.8 mm20 parts2LNo license0Riot po-2025
smartuni
28.3 × 57.5 mm13 parts2LNo license0AVR/Arduino
LCD HAT
bitbank2
45.7 × 53.4 mm11 parts2LApache-2.016ESP32
Lhc tijolo32 board
lhc
24 × 84.5 mm44 parts2LNo license6ArduLogger powerRouted
sbeddes
71.5 × 68.5 mm13 parts2LNo license1Splitboard right
CHAPARII
185.6 × 150.7 mm127 parts2LNo license0Splitboard right
Mona-zza
185.6 × 150.7 mm127 parts2LNo license0CapSenseDuo
drbz-zhou
30 × 51.3 mm44 parts2LNo license0Pca electronics
UWCubeSat
22.9 × 50.8 mm18 parts2LNo license0FEATHER-SAO
sphereinabox
33 × 50.2 mm6 parts2LNo license0RP2040/RP2350
MacSplit60
neerajadsul
166.1 × 112 mm68 parts2LMIT0Mesh base
edgecollective
67 × 64.5 mm3 parts2LMIT0RP2040/RP2350
Interface
OisinS13
106.8 × 107 mm105 parts2LGPL-3.00DMM Feather Specific
oihdesigns
68.5 × 53.3 mm57 parts4LNo license2
How designs wire the Adafruit_Feather_Generic
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the Adafruit_Feather_Generic connects to, and the resistors, capacitors and other passives placed on it.
- The AREF pin is left unconnected on 17 of 21 designs (a signal on 4).
- The SPARE pin is left unconnected on 17 of 21 designs (GND on 2, a signal on 2).
- The RESET pin is left unconnected on 16 of 21 designs (a signal on 5).
- The 3V3 pin is tied to 3.3V on 14 of 21 designs (not connected on 6).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESETpin 1 | Connected to: Not connected 76% · a signal 24% | — |
| 3V3pin 2 | Connected to: 3.3V 67% · not connected 29% | — |
| AREFpin 3 | Connected to: Not connected 81% · a signal 19% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SPAREpin 16 | Connected to: Not connected 81% | — |
| ENpin 27 | Connected to: Not connected 67% · a signal 33% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bubby by mikeysklar, LCD HAT by bitbank2, Automatic weather station by cryologger and Ice tracking beacon by cryologger.
The Adafruit_Feather_Generic in open source designs
The gallery holds 29 open source boards using the Adafruit_Feather_Generic from 23 GitHub repositories; a typical one measures about 90.5 × 73.7 mm and carries around 44 components.
86% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Bubby by mikeysklar.
Parts used alongside the Adafruit_Feather_Generic
Microcontrollers on boards using the Adafruit_Feather_Generic
What boards using the Adafruit_Feather_Generic are built for
Adafruit_Feather_Generic: common questions
Where can I find a Adafruit_Feather_Generic reference design?
Each of the 29 boards on this page is a real design using the Adafruit_Feather_Generic. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Adafruit_Feather_Generic AREF pin connected?
The AREF pin is left unconnected on 17 of 21 designs (a signal on 4). Counted from the KiCad layouts of 21 open source designs using the Adafruit_Feather_Generic.
How is the Adafruit_Feather_Generic SPARE pin connected?
The SPARE pin is left unconnected on 17 of 21 designs (GND on 2, a signal on 2). Counted from the KiCad layouts of 21 open source designs using the Adafruit_Feather_Generic.
How is the Adafruit_Feather_Generic RESET pin connected?
The RESET pin is left unconnected on 16 of 21 designs (a signal on 5). Counted from the KiCad layouts of 21 open source designs using the Adafruit_Feather_Generic.
What parts are used alongside the Adafruit_Feather_Generic?
The Adafruit_BME280, Pico, Pololu_D36V6x and RockBLOCK_Footprint appear in the most repositories here.
Which microcontrollers do boards using the Adafruit_Feather_Generic use?
Most are built on RP2040/RP2350 (3), AVR/Arduino (2), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the Adafruit_Feather_Generic?
The median is 90.5 × 73.7 mm, and 86% are two-layer designs.
What is the most popular open source board using the Adafruit_Feather_Generic?
By GitHub stars, Bubby by mikeysklar, with 30 stars.
Can I simulate one of these boards using the Adafruit_Feather_Generic before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.