Splitboard right
Mona-zza·Split·PCB/splitboard right.kicad_pcb
About the Splitboard right PCB
Splitboard right is an open source PCB design by Mona-zza, published on GitHub. It is a 2-layer board measuring 185.6 × 150.7 mm, with 127 components from 7 distinct parts.
Other key parts include the Adafruit_Feather_Generic. By type, the board carries 50 inductors, 38 switches, 38 diodes and 1 module.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
The keyboard uses a split layout with around 76 keys, The design is meant to be customizable and DIY-friendly. It uses Kailh hot-swap sockets, which means switches can be replaced anytime without needing to desolder them. This makes it easy to experiment with different switches l
The keyboard uses a split layout with around 76 keys, The design is meant to be customizable and DIY-friendly. It uses Kailh hot-swap sockets, which means switches can be replaced anytime without needing to desolder them. This makes it easy to experiment with different switches later. For the controller, I used the nRF52840 development board, which works well with ZMK firmware. ZMK alows the keyboard to support Bluetooth, so it can be used wirelessly. It also support customizable keymaps, layers, and other advanced keyboard features.
Main components on the Splitboard right
Splitboard right bill of materials (BOM)
127 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Adafruit_Feather_Generic | Adafruit_Feather | A1 |
| 30 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW9, SW10 +22 |
| 4 | SW_Push | SW_Hotswap_Kailh_MX_1.50u | SW7, SW14, SW21, SW28 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_1.50u_90deg | SW8, SW15 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_2.00u_90deg | SW22, SW34 |
| 38 | D_45deg | DO35-7 | D1, D2, D3, D4, D5, D6, D7, D8 +30 |
| 50 | WS2812B | BAcklight | L1, L2, L3, L4, L5, L6, L7, L8 +42 |
Splitboard right design files
The KiCad project lives in the Mona-zza/Split repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/splitboard right.kicad_pcb
- SchematicPCB/splitboard right.kicad_sch
Splitboard right: common questions
How big is the Splitboard right PCB?
The Splitboard right measures 185.6 × 150.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Splitboard right?
127 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Splitboard right design files?
From the Mona-zza/Split repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Splitboard right design in my own project?
The repository has no license, so all rights stay with Mona-zza. Use it as a reference, and ask the author before reusing the design.