TimTime
montoyatim01·TimTime·Board/TimTime.kicad_pcb
About the TimTime PCB
TimTime is an open source STM32 PCB design by montoyatim01, published on GitHub. It is a 4-layer board measuring 58.2 × 32.3 mm, with 58 components from 26 distinct parts.
Its main chip is the STM32L433CCTx, from the STM32 family. Other key parts include the MCP73834-CNI/MF, LT1761ES5-2.8#TRMPBF, 24AA00T_OT and USBLC6-2SC6. By type, the board carries 20 resistors, 19 capacitors, 6 ICs, 6 connectors, 4 switches and 1 crystal.
From the project
Open Source Timecode Lock Box
Main components on the TimTime
TimTime bill of materials (BOM)
58 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73834-CNI/MF MCP73834-CNI_MF | SON50P300X300X100-11N-D | IC1 |
| 1 | LT1761ES5-2.8#TRMPBF | SOT95P280X100-5N | IC2 |
| 1 | LT1761ES5-2.8#TRMPBF LTC1844ES5-3.3#TRPBF | SOT95P280X100-5N | IC3 |
| 1 | STM32L433CCTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | 24AA00T_OT Microchip | SOT95P280X145-5N | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | 7P-25.000MBP-T 7P-19.200MBP-T | 7P25000MBPT | Y1 |
| 1 | USB4085-GF-A_REVA | GCT_USB4085-GF-A_REVA | J1 |
| 1 | SJ1-3523NG | CUI_SJ1-3523NG | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 3 | SKPMBHE010 | SKPMBHE010 | S1, S2, S4 |
| 1 | KSS241GLFS | KSS241GLFS | S3 |
| 1 | BLUE | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 39nH | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 10 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C6, C7, C8, C10, C11, C14 +2 |
| 3 | 1.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C9, C12 |
| 3 | 12uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C15, C17 |
| 2 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C16 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 7 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R14, R15, R19 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 7 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R10, R11, R12, R13, R17, R18 |
| 2 | 60 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 2K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R20 |
TimTime design files
The KiCad project lives in the montoyatim01/TimTime repository on GitHub; these links point at the commit this page was built from.
- LayoutBoard/TimTime.kicad_pcb
- SchematicBoard/TimTime.kicad_sch
- BOMBoard/TimTimeval.csv
TimTime: common questions
What microcontroller does the TimTime use?
The TimTime is built around the STM32L433CCTx, from the STM32 family.
How big is the TimTime PCB?
The TimTime measures 58.2 × 32.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TimTime?
58 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TimTime design files?
From the montoyatim01/TimTime repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TimTime design in my own project?
The repository has no license, so all rights stay with montoyatim01. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TimTime without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k