5 open source boards using the STM32L433CCTx

Real designs built with the STM32L433CCTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32L433CCTx

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32L433CCTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The VDDA_9 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1.2 µF).
  • The VDD_24 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The VDDUSB_36 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
VBAT_1pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (14)
PC13_2pin 2Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 10 kΩ (3)
PC14_3pin 3Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 10 kΩ (3)
PC15_4pin 4Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 10 kΩ (3)
PH0_5pin 5Connected to: Signal 80% · not connected 20%
  • Crystal on 80% · 25 MHz (3)
  • Capacitor to GND on 60% · 10 pF (3)
PH1_6pin 6Connected to: Signal 60% · not connected 40%
  • Crystal on 60% · 25 MHz (3)
  • Capacitor to GND on 60% · 10 pF (3)
NRST_7pin 7Connected to: A connector 100%
  • Capacitor to GND on 40% · 100 nF (2)
VSSA_8pin 8Connected to: GND 100%
VDDA_9pin 9Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (9), 1.2 µF (1)
PA0_10pin 10Connected to: Not connected 60% · a signal 40%
PA1_11pin 11Connected to: Not connected 80% · a signal 20%
PA2_12pin 12Connected to: Not connected 80% · a signal 20%
PA3_13pin 13Connected to: LR2021IMLTRT 60% · not connected 20%
  • Series resistor on 80% · 10 kΩ (3), 100 kΩ (1)
PA4_14pin 14Connected to: LR2021IMLTRT 60% · not connected 20%
  • Series resistor on 60% · 10 kΩ (3)
PA5_15pin 15Connected to: LR2021IMLTRT 60%
  • Series resistor on 80% · 10 kΩ (4)
VSS_23pin 23Connected to: GND 100%
VDD_24pin 24Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5), 1 µF (3), 4.7 µF (1)
PA8_29pin 29Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 100 Ω (3)
VSS_35pin 35Connected to: GND 100%
VDDUSB_36pin 36Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)
PB6_42pin 42Connected to: A connector 80%
  • Pull-up to 3.3V on 80% · 10 kΩ (3), 4.7 kΩ (1)
PB7_43pin 43Connected to: A connector 80%
  • Pull-up to 3.3V on 80% · 10 kΩ (3), 4.7 kΩ (1)
PH3_44pin 44Connected to: GND 80% · a signal 20%
VSS_47pin 47Connected to: GND 100%
VDD_48pin 48Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (10)

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TimTime by montoyatim01, Pocket pet by kondovskii, Chickenstick by npgo22 and Chickenstick by npgo22.

The STM32L433CCTx in open source designs

The gallery holds 5 open source boards using the STM32L433CCTx from 5 GitHub repositories; a typical one measures about 42 × 100 mm and carries around 96 components.

80% use four copper layers or more, and 0% carry an open source license.

The most starred is TimTime by montoyatim01.

Microcontrollers on boards using the STM32L433CCTx

What boards using the STM32L433CCTx are built for

STM32L433CCTx: common questions

Where can I find a STM32L433CCTx reference design?

Each of the 5 boards on this page is a real design using the STM32L433CCTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32L433CCTx VBAT_1 pin?

The VBAT_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the STM32L433CCTx.

What decoupling capacitors do designs use on the STM32L433CCTx VDDA_9 pin?

The VDDA_9 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1.2 µF). Counted from the KiCad layouts of 5 open source designs using the STM32L433CCTx.

What decoupling capacitors do designs use on the STM32L433CCTx VDD_24 pin?

The VDD_24 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32L433CCTx.

What parts are used alongside the STM32L433CCTx?

The USBLC6-2SC6, BQ29700, LP5907MFX-3.3, LR2021IMLTRT and MCP73831-2-MC appear in the most repositories here.

Which microcontrollers do boards using the STM32L433CCTx use?

Most are built on STM32 (5).

How big is a typical board using the STM32L433CCTx?

The median is 42 × 100 mm, and 20% are two-layer designs.

What is the most popular open source board using the STM32L433CCTx?

By GitHub stars, TimTime by montoyatim01, with 1 stars.

Can I simulate one of these boards using the STM32L433CCTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part