HardLabs

MSPM0C1104 QWIIC

mortens-lab·MSPM0C1104·MSPM0C1104_QWIIC/MSPM0C1104_QWIIC.kicad_pcb

MSPM0C1104 QWIIC PCB layout, top view — open source TI MSP430/CC board by mortens-lab

About the MSPM0C1104 QWIIC PCB

MSPM0C1104 QWIIC is an open source TI MSP430/CC PCB design by mortens-lab, published on GitHub under the MIT license. It is a 2-layer board measuring 6 × 8 mm, with 10 components from 8 distinct parts.

Its main chip is the MSPM0C1104S8YCJR, from the TI MSP430/CC family. By type, the board carries 4 resistors, 2 diodes, 2 capacitors, 1 IC and 1 connector.

From the project

KiCad and Gerbers files, TI Composer Studio Code

Main components on the MSPM0C1104 QWIIC

MSPM0C1104S8YCJR

MSPM0C1104 QWIIC bill of materials (BOM)

10 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MSPM0C1104S8YCJR
Texas Instruments
U1
1
PRT-14417
Conn_01x04
Sparkfun
J3
1
APHD1608LCGCK
GREEN
Kingbright
D1
1
APTD1608LSYCK
YELLOW
Kingbright
D2
1
GRM155R71H104KE14D
100n
Murata
C1
1
CL21B106KOQNNNE
10u/16V
Samsung
C2
2
CRCW04021K00FKED
1K
Vishay
R2, R5
2
CRCW04024K70FKED
4K7
Vishay
R3, R4

MSPM0C1104 QWIIC design files

The KiCad project lives in the mortens-lab/MSPM0C1104 repository on GitHub; these links point at the commit this page was built from.

MSPM0C1104 QWIIC: common questions

What microcontroller does the MSPM0C1104 QWIIC use?

The MSPM0C1104 QWIIC is built around the MSPM0C1104S8YCJR, from the TI MSP430/CC family.

How big is the MSPM0C1104 QWIIC PCB?

The MSPM0C1104 QWIIC measures 6 × 8 mm, has 2 copper layers and is 1.09 mm thick.

How many components are on the MSPM0C1104 QWIIC?

10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MSPM0C1104 QWIIC design files?

From the mortens-lab/MSPM0C1104 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MSPM0C1104 QWIIC design in my own project?

Yes, under the terms of its MIT license, which mortens-lab chose for the repository.

Can I test firmware for the MSPM0C1104 QWIIC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

More boards in MSPM0C1104

Similar boards