CHEN TEITI Gas Sensor
About the CHEN TEITI Gas Sensor PCB
CHEN TEITI Gas Sensor is an open source AVR/Arduino PCB design by MOSH-Insa-Toulouse, published on GitHub. It is a 2-layer board measuring 71.1 × 48.3 mm, with 21 components from 14 distinct parts.
Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the LTC1050 and RN2483_Breakout. By type, the board carries 8 connectors, 4 capacitors, 4 resistors and 2 ICs.
It belongs with the sensors designs in this gallery.
From the project
Dans le cadre du PTP �Innovative Smart System�, le module intitul� �SMART DEVICES� int�gre les notions de capteurs, de micro-contr�leurs, d�open source hardware et de r�alisation de fichiers de conceptions de cartes �lectroniques sous KiCad. Les enseignements de ce module ont pou
Dans le cadre du PTP �Innovative Smart System�, le module intitul� �SMART DEVICES� int�gre les notions de capteurs, de micro-contr�leurs, d�open source hardware et de r�alisation de fichiers de conceptions de cartes �lectroniques sous KiCad. Les enseignements de ce module ont pour objectif de fournir les outils n�cessaires pour la conception et la r�alisation d�une carte �lectronique pouvant communiquer les informations d�un capteur sur un r�seau bas d�bit tel que LoRa.
Main components on the CHEN TEITI Gas Sensor
CHEN TEITI Gas Sensor bill of materials (BOM)
21 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC1050 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | RN2483_Breakout | Modul_RN2483_Breakout | U2 |
| 1 | Power | Socket_Strip_Arduino_1x08 | P1 |
| 1 | Analog | Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Strip_Arduino_1x08 | P4 |
| 4 | CONN_01X01 | Arduino_1pin | P5, P6, P7, P8 |
| 2 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | Rcal1, Rcal2 |
| 1 | 10k<...<1G | TO-5-4 | Rsensor1 |
| 3 | 100n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 1 | 1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 2 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
CHEN TEITI Gas Sensor design files
The KiCad project lives in the MOSH-Insa-Toulouse/CHEN_TEITI_Gas_Sensor repository on GitHub; these links point at the commit this page was built from.
- LayoutProjet/Projet.kicad_pcb
CHEN TEITI Gas Sensor: common questions
What microcontroller does the CHEN TEITI Gas Sensor use?
The CHEN TEITI Gas Sensor is built around the Arduino_1pin, from the AVR/Arduino family.
How big is the CHEN TEITI Gas Sensor PCB?
The CHEN TEITI Gas Sensor measures 71.1 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CHEN TEITI Gas Sensor?
21 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the CHEN TEITI Gas Sensor design files?
From the MOSH-Insa-Toulouse/CHEN_TEITI_Gas_Sensor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CHEN TEITI Gas Sensor design in my own project?
The repository has no license, so all rights stay with MOSH-Insa-Toulouse. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CHEN TEITI Gas Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746