5 open source boards using the RN2483_Breakout
Real designs built with the RN2483_Breakout, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
2020 2021 LIEW ZHOU
MOSH-Insa-Toulouse
68.6 × 53.3 mm24 parts2LMIT0AVR/Arduino
CHEN TEITI Gas Sensor
MOSH-Insa-Toulouse
71.1 × 48.3 mm21 parts2LNo license0Amour Chadi--Amour Redouane--Lebelguet Hugo--Benchehida Yacine--Beyah Sami--Bouisson Arnaud
MOSH-Insa-Toulouse
96 × 67 mm19 parts2LNo license0MOSH-INSA
RedouaneAmour
96 × 67 mm19 parts2LNo license0Projet-IoT---Capteur-LoRa---detection de gaz a partir de nanoparticules
RedouaneAmour
96 × 67 mm19 parts2LNo license0
How designs wire the RN2483_Breakout
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RN2483_Breakout connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 5 of 5 designs.
- The VIN pin is left unconnected on 5 of 5 designs.
- Pin 9 is left unconnected on 3 of 3 designs.
- Pin 10 is left unconnected on 3 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 6 | Connected to: 3.3V 100% | — |
| VINpin 7 | Connected to: Not connected 100% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| Pin 9 | Connected to: Not connected 100% | — |
| Pin 10 | Connected to: Not connected 100% | — |
| Pin 11 | Connected to: Not connected 100% | — |
| Pin 12 | Connected to: Not connected 100% | — |
| Pin 13 | Connected to: Not connected 100% | — |
| Pin 14 | Connected to: Not connected 100% | — |
| Pin 15 | Connected to: Not connected 100% | — |
| Pin 16 | Connected to: Not connected 100% | — |
| Pin 17 | Connected to: Not connected 100% | — |
| Pin 18 | Connected to: Not connected 100% | — |
| Pin 19 | Connected to: Not connected 100% | — |
| Pin 20 | Connected to: Not connected 100% | — |
| Pin 21 | Connected to: Not connected 100% | — |
| Pin 22 | Connected to: Not connected 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 2020 2021 LIEW ZHOU by MOSH-Insa-Toulouse, Amour Chadi--Amour Redouane--Lebelguet Hugo--Benchehida Yacine--Beyah Sami--Bouisson Arnaud by MOSH-Insa-Toulouse, CHEN TEITI Gas Sensor by MOSH-Insa-Toulouse and MOSH-INSA by RedouaneAmour.
The RN2483_Breakout in open source designs
The gallery holds 5 open source boards using the RN2483_Breakout from 5 GitHub repositories; a typical one measures about 96 × 67 mm and carries around 19 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is 2020 2021 LIEW ZHOU by MOSH-Insa-Toulouse.
Parts used alongside the RN2483_Breakout
Microcontrollers on boards using the RN2483_Breakout
What boards using the RN2483_Breakout are built for
RN2483_Breakout: common questions
Where can I find a RN2483_Breakout reference design?
Each of the 5 boards on this page is a real design using the RN2483_Breakout. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RN2483_Breakout 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RN2483_Breakout.
How is the RN2483_Breakout VIN pin connected?
The VIN pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RN2483_Breakout.
How is the RN2483_Breakout pin 9 connected?
Pin 9 is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the RN2483_Breakout.
Which microcontrollers do boards using the RN2483_Breakout use?
Most are built on AVR/Arduino (2).
How big is a typical board using the RN2483_Breakout?
The median is 96 × 67 mm, and 100% are two-layer designs.
What is the most popular open source board using the RN2483_Breakout?
By GitHub stars, 2020 2021 LIEW ZHOU by MOSH-Insa-Toulouse, with 0 stars.
Can I simulate one of these boards using the RN2483_Breakout before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.