Pssst TX final amp
About the Pssst TX final amp PCB
Pssst TX final amp is an open source PCB design by mostlydiyrf, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 101.6 × 30.6 mm, with 37 components from 21 distinct parts.
Other key parts include the LM317L_TO92. By type, the board carries 12 capacitors, 8 connectors, 8 resistors, 2 transistors, 2 test points and 2 inductors.
Main components on the Pssst TX final amp
Pssst TX final amp bill of materials (BOM)
37 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317L_TO92 | TO-92_Inline | U1 |
| 1 | 2N2219A | TO-39-3 | Q1 |
| 1 | IRF510 | TO-220-3_Vertical | Q2 |
| 3 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | Phono_Jack_RCA | SMA_EdgeMount_0.062_Samtec_wHoles | J4, J5 |
| 3 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J6, J7, J8 |
| 1 | 10K | POT_Bourns_3362P | RV1 |
| 1 | Transformer_Bifilar_CT_Toroid | Toroid_Transformer_Bifilar_T50_Vertical_P2.54mm | T1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | TP1, TP2 |
| 1 | 22uH | L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | 22uH | L_Axial_L11.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_MECC | L2 |
| 1 | 0.01uF | Ceramic_Disk_Capacitor_P5.00mm | C1 |
| 9 | 0.1uF | Ceramic_Disk_Capacitor_P5.00mm | C2, C4, C5, C6, C7, C8, C10, C11 +1 |
| 1 | 0.047uF | Ceramic_Disk_Capacitor_P5.00mm | C3 |
| 1 | 220 | CP_Radial_D5.0mm_P2.50mm | C9 |
| 2 | 2.7K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R1, R3 |
| 1 | 680 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R2 |
| 2 | 10 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R4, R7 |
| 1 | 270 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R8 |
| 1 | 1K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R9 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 51 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R10 |
Pssst TX final amp design files
The KiCad project lives in the mostlydiyrf/p3st repository on GitHub; these links point at the commit this page was built from.
Pssst TX final amp: common questions
How big is the Pssst TX final amp PCB?
The Pssst TX final amp measures 101.6 × 30.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pssst TX final amp?
37 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pssst TX final amp design files?
From the mostlydiyrf/p3st repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pssst TX final amp design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in p3st
Pssst IF module
101.6 × 30.6 mm59 parts2LCC-BY-NC-4.06
P3ST motherboard rev.C
189 × 152.7 mm35 parts2LCC-BY-NC-4.06
P3ST motherboard rev.B
189 × 152.7 mm29 parts2LCC-BY-NC-4.06
Pssst audio out
59.1 × 19.7 mm19 parts2LCC-BY-NC-4.06
P3ST Microphone Amp
63.5 × 25.4 mm19 parts2LCC-BY-NC-4.06
Pssst RF amp
63.5 × 25.4 mm16 parts2LCC-BY-NC-4.06
Pssst Xiao Digital VFO BFO
57 × 19.9 mm15 parts2LCC-BY-NC-4.06
Pssst final lowpass
63.5 × 25.4 mm12 parts2LCC-BY-NC-4.06
Pssst frontend bandpass
63.5 × 25.4 mm11 parts2LCC-BY-NC-4.06
Pssst VFO Mixer
63.5 × 25.4 mm6 parts2LCC-BY-NC-4.06
Pssst BFO mixer
59.1 × 16.9 mm6 parts2LCC-BY-NC-4.06