Pssst audio out
About the Pssst audio out PCB
Pssst audio out is an open source PCB design by mostlydiyrf, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 59.1 × 19.7 mm, with 19 components from 16 distinct parts.
Other key parts include the LM380N-14. By type, the board carries 6 capacitors, 6 resistors, 5 connectors, 1 IC and 1 transistor.
It belongs with the audio designs in this gallery.
Main components on the Pssst audio out
Pssst audio out bill of materials (BOM)
19 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM380N-14 | DIP-14_W7.62mm | U1 |
| 1 | 2N2222A | TO-18-3 | Q1 |
| 2 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x02 | SMA_EdgeMount_0.062_Samtec_wHoles | J3, J4 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 470uF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 22uF | CP_Radial_D5.0mm_P2.00mm | C4 |
| 2 | 220uF | CP_Radial_D5.0mm_P2.00mm | C5, C6 |
| 1 | 100K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R1 |
| 1 | 47K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R2 |
| 1 | 100 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R3 |
| 1 | 2.2K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R4 |
| 1 | 1K | Resistor_Quarter_Watt_P10.16mm_Horizontal | R5 |
| 1 | 2.2 | Resistor_Quarter_Watt_P10.16mm_Horizontal | R6 |
Pssst audio out design files
The KiCad project lives in the mostlydiyrf/p3st repository on GitHub; these links point at the commit this page was built from.
Pssst audio out: common questions
How big is the Pssst audio out PCB?
The Pssst audio out measures 59.1 × 19.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pssst audio out?
19 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pssst audio out design files?
From the mostlydiyrf/p3st repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pssst audio out design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in p3st
Pssst IF module
101.6 × 30.6 mm59 parts2LCC-BY-NC-4.06
Pssst TX final amp
101.6 × 30.6 mm37 parts2LCC-BY-NC-4.06
P3ST motherboard rev.C
189 × 152.7 mm35 parts2LCC-BY-NC-4.06
P3ST motherboard rev.B
189 × 152.7 mm29 parts2LCC-BY-NC-4.06
P3ST Microphone Amp
63.5 × 25.4 mm19 parts2LCC-BY-NC-4.06
Pssst RF amp
63.5 × 25.4 mm16 parts2LCC-BY-NC-4.06
Pssst Xiao Digital VFO BFO
57 × 19.9 mm15 parts2LCC-BY-NC-4.06
Pssst final lowpass
63.5 × 25.4 mm12 parts2LCC-BY-NC-4.06
Pssst frontend bandpass
63.5 × 25.4 mm11 parts2LCC-BY-NC-4.06
Pssst VFO Mixer
63.5 × 25.4 mm6 parts2LCC-BY-NC-4.06
Pssst BFO mixer
59.1 × 16.9 mm6 parts2LCC-BY-NC-4.06
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687