Dipole-868

movray·antennas·dipole-868/dipole-868.kicad_pcb

Dipole-868 PCB layout, top view — open source board by movray

About the Dipole-868 PCB

Dipole-868 is an open source PCB design by movray, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 147 × 21.5 mm, with 1 components from 1 distinct parts.

It belongs with the rf & radio designs in this gallery.

From the project

Printed PCB antennas (LoRa 868 MHz dipole and Moxon) designed with an LLM: NEC2 + openEMS simulation, KiCad as code

Printed half-wave dipole for LoRa 868 MHz. It is the reference antenna (2.15 dBi by definition) for comparing the Moxon (../moxon-868) and bought antennas with RSSI measurements, and it is a usable omnidirectional antenna in its own right (in the plane at right angles to the dipole). Single-sided, no parts except the coax: home etching or JLCPCB.

Total length 161.7 mm in free space (NEC2), 139.0 mm on FR4 including the 2 mm feed gap. Copper strip 3 mm wide, board 147 x 22 mm.

Dipole-868, from the project README
From the project README

Dipole-868 bill of materials (BOM)

1 components, 1 distinct parts.

QtyPartRefs
1
RG316 pigtail
J1

Dipole-868 design files

The KiCad project lives in the movray/antennas repository on GitHub; these links point at the commit this page was built from.

Dipole-868: common questions

How big is the Dipole-868 PCB?

The Dipole-868 measures 147 × 21.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dipole-868?

1 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dipole-868 design files?

From the movray/antennas repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dipole-868 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which movray chose for the repository.

Similar boards