EEE3088F Project

Mphoentle1·EEE3088F·Hardware/EEE3088F Project.kicad_pcb

EEE3088F Project PCB layout, top view — open source STM32 board by Mphoentle1

About the EEE3088F Project PCB

EEE3088F Project is an open source STM32 PCB design by Mphoentle1, published on GitHub. It is a 2-layer board measuring 12.3 × 24.5 mm, with 31 components from 9 distinct parts.

Its main chip is the STM32F051C6Tx, from the STM32 family. Other key parts include the AD8606ARZ and OP1177ARM. By type, the board carries 24 resistors and 7 ICs.

From the project

DoA project

Main components on the EEE3088F Project

AD8606ARZOP1177ARMSTM32F051C6Tx

EEE3088F Project bill of materials (BOM)

31 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
AD8606ARZ
OP1177ARM
U1, U4, U5, U6
2
OP1177ARM
U2, U3
1
STM32F051C6Tx
U7
4
10K
R1, R2, R16, R17
2
4.7K
10K
R3, R9
9
10K
R4, R6, R7, R10, R12, R14, R18, R20 +1
6
100K
R5, R8, R11, R13, R19, R24
1
10K
100K
R15
2
100
R21, R22

EEE3088F Project design files

The KiCad project lives in the Mphoentle1/EEE3088F repository on GitHub; these links point at the commit this page was built from.

EEE3088F Project: common questions

What microcontroller does the EEE3088F Project use?

The EEE3088F Project is built around the STM32F051C6Tx, from the STM32 family.

How big is the EEE3088F Project PCB?

The EEE3088F Project measures 12.3 × 24.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EEE3088F Project?

31 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EEE3088F Project design files?

From the Mphoentle1/EEE3088F repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EEE3088F Project design in my own project?

The repository has no license, so all rights stay with Mphoentle1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EEE3088F Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in EEE3088F

Similar boards