Version 5 (FINAL)
Mphoentle1·EEE3088F·Hardware/Final Design/Version 5 (FINAL).kicad_pcb
About the Version 5 (FINAL) PCB
Version 5 (FINAL) is an open source STM32 PCB design by Mphoentle1, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 52 components from 15 distinct parts.
Its main chip is the STM32F429ZGTX, from the STM32 family. Other key parts include the AD8606ARZ. By type, the board carries 26 capacitors, 19 resistors and 5 ICs.
From the project
DoA project
Main components on the Version 5 (FINAL)
Version 5 (FINAL) bill of materials (BOM)
52 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AD8606ARZ | AD8606ARZ-REEL7 (OPAMP) | U1, U4, U5, U6 |
| 1 | STM32F429ZGTX STM32F429ZGTx | LQFP-144_20x20mm_P0.5mm | U11 |
| 2 | CMM-2718AT-42308 CMM-2718AT-42308-TR | XDCR_CMM-2718AT-42308-TR (MIC) | MIC1, MIC2 |
| 3 | 10UF 10uF | C0805 (CAPACITOR) | C1, C7, C29 |
| 4 | 10NF 10nF | C0805 (CAPACITOR) | C2, C3, C30, C31 |
| 2 | 2.2UF 2.2uF | C0805 (CAPACITOR) | C4, C11 |
| 16 | 100NF 100nF | C0805 (CAPACITOR) | C5, C6, C12, C13, C14, C15, C16, C23 +8 |
| 1 | 4.7UF 4.7uF | C0805 (CAPACITOR) | C28 |
| 5 | 10K | R0805 (RESISTOR) | R1, R2, R15, R16, R17 |
| 2 | 4.7K | R0805 (RESISTOR) | R3, R9 |
| 2 | 100K | R0805 (RESISTOR) | Rf1, Rf3 |
| 2 | 1K | R0805 (RESISTOR) | Rf2, Rf6 |
| 4 | 82K | R0805 (RESISTOR) | Rf4, Rf5, Rg4, Rg8 |
| 2 | 3.3K | R0805 (RESISTOR) | Rg1, Rg3 |
| 2 | 2.7K | R0805 (RESISTOR) | Rg2, Rg9 |
Version 5 (FINAL) design files
The KiCad project lives in the Mphoentle1/EEE3088F repository on GitHub; these links point at the commit this page was built from.
Version 5 (FINAL): common questions
What microcontroller does the Version 5 (FINAL) use?
The Version 5 (FINAL) is built around the STM32F429ZGTX, from the STM32 family.
How big is the Version 5 (FINAL) PCB?
The Version 5 (FINAL) measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Version 5 (FINAL)?
52 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Version 5 (FINAL) design files?
From the Mphoentle1/EEE3088F repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Version 5 (FINAL) design in my own project?
The repository has no license, so all rights stay with Mphoentle1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Version 5 (FINAL) without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in EEE3088F
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k