Power Electronics Simulation Suite ngspice
About the Power Electronics Simulation Suite ngspice PCB
Power Electronics Simulation Suite ngspice is an open source PCB design by mrdimara, published on GitHub under the MIT license. It is a board, with 5 components from 5 distinct parts.
By type, the board carries 2 resistors and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
A collection of ngspice simulations, KiCad projects, reusable SPICE subcircuits, and Octave/MATLAB post-processing scripts for studying and developing power electronics systems using fully open-source tools.
A collection of ngspice simulations, KiCad projects, reusable SPICE subcircuits, and Octave/MATLAB post-processing scripts for studying and developing power electronics systems using fully open-source tools.
The repository contains learning exercises, reusable models, converter implementations, motor-drive simulations, photovoltaic systems, battery charging circuits, and control techniques with increasing levels of realism through non-ideal component modeling.
Power Electronics Simulation Suite ngspice bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1 | I1 | |
| 1 | VSIN | V1 | |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 0.1 | R1 | |
| 1 | 1e6 | R2 |
Power Electronics Simulation Suite ngspice design files
The KiCad project lives in the mrdimara/Power_Electronics_Simulation_Suite_ngspice repository on GitHub; these links point at the commit this page was built from.
Power Electronics Simulation Suite ngspice: common questions
How many components are on the Power Electronics Simulation Suite ngspice?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Electronics Simulation Suite ngspice design files?
From the mrdimara/Power_Electronics_Simulation_Suite_ngspice repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Power Electronics Simulation Suite ngspice design in my own project?
Yes, under the terms of its MIT license, which mrdimara chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k