HardLabs

Module 16S PassiveBalanceAddOn

stuartpittaway·diyBMSv4·ModuleV490-PassiveBal/Module_16S_PassiveBalanceAddOn.kicad_pcb

Module 16S PassiveBalanceAddOn layout, top view — open source board by stuartpittaway
Simulate this board

About the Module 16S PassiveBalanceAddOn

Module 16S PassiveBalanceAddOn is an open source PCB design by stuartpittaway, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 61 × 74 mm, with 86 components from 9 distinct parts.

By type, the board carries 48 resistors, 17 transistors, 16 capacitors and 3 connectors.

It belongs with the power & battery designs in this gallery.

From the project

Version 4 of the diyBMS

This is the hardware for the PASSIVE BALANCE BOARD add-on to the all in one monitoring solution.

WARNING: This hardware is considered experimental & prototype, use at your own risk - it may not work as intended or at all.

Look inside the "export" folder for the relevant production files. You will need these files for the construction:

module16spassivegerbers.zip module16spassivebomjlc.csv module16spassivecpljlc.csv

Module 16S PassiveBalanceAddOn bill of materials (BOM)

86 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
AO3400A
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8
1
SZNUD3160LT1G
SZNUD3160
Q17
1
B2B-PH-SM4-TB(LF)(SN)
FAN_12V
J1
2
X6511WV-22H-C30D60
22PIN
J2, J5
2
CMFB103F3950FANT
10K NTC
TH1, TH2
16
19-213/Y2C-CQ2R2L/3T(CY)
Yellow
C0, C1, C2, C3, C4, C5, C6, C7 +8
16
0603WAF1000T5E
100R
R20, R21, R22, R23, R24, R25, R32, R33 +8
16
CRH2512J18R0E04Z
18R 2W
R26, R27, R28, R29, R30, R31, R38, R39 +8
16
0603WAF3300T5E
330R
R53, R54, R55, R56, R57, R58, R59, R60 +8

Module 16S PassiveBalanceAddOn design files

The KiCad project lives in the stuartpittaway/diyBMSv4 repository on GitHub; these links point at the commit this page was built from.

Module 16S PassiveBalanceAddOn: common questions

How big is the Module 16S PassiveBalanceAddOn?

The Module 16S PassiveBalanceAddOn measures 61 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Module 16S PassiveBalanceAddOn?

86 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Module 16S PassiveBalanceAddOn design files?

From the stuartpittaway/diyBMSv4 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Module 16S PassiveBalanceAddOn design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in diyBMSv4

Similar boards