PS2BaseMount NullPins
About the PS2BaseMount NullPins PCB
PS2BaseMount NullPins is an open source PCB design by MRKane05, published on GitHub. It is a 2-layer board measuring 234.7 × 112.4 mm, with 22 components from 21 distinct parts.
Other key parts include the AudioAmp, LM358, PJ30240, Audio_Left and Audio_Right. By type, the board carries 7 modules, 5 ICs, 5 connectors, 2 resistors and 1 transistor.
From the project
The KiCad project for the base mount for the "Junkstation" PS2 portable project
This is a dump of the KiCad project for the Junkstation PS2 project I made a few years ago. I'm really just backing it up for prosperity. I'm taking no responsibility for this and it really should be used only as reference.
It's worth noting that there are a couple of mistakes on the board that I haven't fixed: -The Ethernet wiring for the Mango isn't correct, and troubleshooting it was exceedingly difficult, so much so that I didn't write it down when I got it right, I just put the lid on it -The Ethernet lines for the Mango shouldn't be pulled down to Ground but pulled to the "R0" pin on…
Main components on the PS2BaseMount NullPins
PS2BaseMount NullPins bill of materials (BOM)
22 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AudioAmp | PAM8803_AudioAmp | U1 |
| 1 | LM358 | LM358(SMD) | U2 |
| 1 | PJ30240 | AudioJack_PJ30240 | U3 |
| 1 | Audio_Left | JST_ZE_SM02B-ZESS-TBT_1x02-1MP_P1.50mm_Horizontal | U4 |
| 1 | Audio_Right | JST_ZE_SM02B-ZESS-TBT_1x02-1MP_P1.50mm_Horizontal | U5 |
| 1 | PS2AVPort | PS2_AVPort_Complete | M1 |
| 1 | TS_LFT | JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | M2 |
| 1 | TS_RHT | JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | M3 |
| 1 | Fan | 2Point_Mount | M4 |
| 1 | PS2AVPort_SideMount | PS2_AVPort_Complete_MountSilk | M5 |
| 1 | 10P_LFT | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | m1 |
| 1 | 10P_RHT | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | m2 |
| 1 | MJE3305 | TO-126-3_Vertical | Q1 |
| 1 | USB_B | USB_A_Custom_Throughhole | J1 |
| 1 | USB_A_Dual | USB_A_Wuerth_61400826021_Horizontal_Stacked | J2 |
| 1 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J3 |
| 2 | PS2_ControlMount | PS2_BoardMountFootprint | P1, P2 |
| 1 | R_POT_US | Potentiometer_Triwood_RM-065 | RV1 |
| 1 | Thermistor_PTC | 2Point_Mount | TH1 |
| 1 | 4.7K | R_2010_5025Metric_Pad1.52x2.65mm_HandSolder | R1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R2 |
PS2BaseMount NullPins design files
The KiCad project lives in the MRKane05/PS2BaseMount repository on GitHub; these links point at the commit this page was built from.
PS2BaseMount NullPins: common questions
How big is the PS2BaseMount NullPins PCB?
The PS2BaseMount NullPins measures 234.7 × 112.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PS2BaseMount NullPins?
22 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS2BaseMount NullPins design files?
From the MRKane05/PS2BaseMount repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PS2BaseMount NullPins design in my own project?
The repository has no license, so all rights stay with MRKane05. Use it as a reference, and ask the author before reusing the design.
