Hat circuit x1
About the Hat circuit x1
Hat circuit x1 is an open source PCB design by muhaimin44, published on GitHub. It is a 2-layer board measuring 24.6 × 38.7 mm, with 9 components from 5 distinct parts.
By type, the board carries 4 diodes, 3 resistors and 2 connectors.
It belongs with the dev boards & breakouts and test & measurement designs in this gallery.
From the project
Project: Altair Mars Rover — Islamic University of Technology (IUT) Subsystem: Drive motor control (IBT-2 / BTS7960 driver interface boards) Revision: v2 (23 Batch redesign) — replaces v1 (21 Batch legacy design) Status: Draft — pending final photos and a few confirmations (see "
Project: Altair Mars Rover — Islamic University of Technology (IUT) Subsystem: Drive motor control (IBT-2 / BTS7960 driver interface boards) Revision: v2 (23 Batch redesign) — replaces v1 (21 Batch legacy design) Status: Draft — pending final photos and a few confirmations (see "Open Items" at bottom)
This README documents the design, function, and assembly of the IBT-2 "hat" circuit boards used to drive the rover's wheel motors. It exists so that:
Hat circuit x1 bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 1 | D | D_T-1_P10.16mm_Horizontal | D4 |
| 3 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Hat circuit x1 design files
The KiCad project lives in the muhaimin44/hat_circuit repository on GitHub; these links point at the commit this page was built from.
Hat circuit x1: common questions
How big is the Hat circuit x1?
The Hat circuit x1 measures 24.6 × 38.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hat circuit x1?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hat circuit x1 design files?
From the muhaimin44/hat_circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hat circuit x1 design in my own project?
The repository has no license, so all rights stay with muhaimin44. Use it as a reference, and ask the author before reusing the design.
More boards in hat_circuit
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k