HardLabs

Hat circuit x6

muhaimin44·hat_circuit·hat_circuit_x6/hat_circuit_x6.kicad_pcb

Hat circuit x6 layout, top view — open source board by muhaimin44

About the Hat circuit x6

Hat circuit x6 is an open source PCB design by muhaimin44, published on GitHub. It is a 2-layer board measuring 165.6 × 79.2 mm, with 50 components from 5 distinct parts.

By type, the board carries 24 diodes, 18 resistors and 8 connectors.

It belongs with the dev boards & breakouts and test & measurement designs in this gallery.

From the project

Project: Altair Mars Rover — Islamic University of Technology (IUT) Subsystem: Drive motor control (IBT-2 / BTS7960 driver interface boards) Revision: v2 (23 Batch redesign) — replaces v1 (21 Batch legacy design) Status: Draft — pending final photos and a few confirmations (see "

Project: Altair Mars Rover — Islamic University of Technology (IUT) Subsystem: Drive motor control (IBT-2 / BTS7960 driver interface boards) Revision: v2 (23 Batch redesign) — replaces v1 (21 Batch legacy design) Status: Draft — pending final photos and a few confirmations (see "Open Items" at bottom)

This README documents the design, function, and assembly of the IBT-2 "hat" circuit boards used to drive the rover's wheel motors. It exists so that:

Hat circuit x6 bill of materials (BOM)

50 components, 5 distinct parts.

QtyPartRefs
6
Conn_02x04_Odd_Even
J1, J4, J5, J6, J7, J8
2
Conn_01x08_Socket
J2, J3
18
LED
D1, D2, D3, D5, D6, D7, D9, D10 +10
6
D
D4, D8, D12, D16, D20, D24
18
R
R1, R2, R3, R4, R5, R6, R7, R8 +10

Hat circuit x6 design files

The KiCad project lives in the muhaimin44/hat_circuit repository on GitHub; these links point at the commit this page was built from.

Hat circuit x6: common questions

How big is the Hat circuit x6?

The Hat circuit x6 measures 165.6 × 79.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hat circuit x6?

50 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hat circuit x6 design files?

From the muhaimin44/hat_circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Hat circuit x6 design in my own project?

The repository has no license, so all rights stay with muhaimin44. Use it as a reference, and ask the author before reusing the design.

More boards in hat_circuit

Similar boards