Muon3 tscircuit placement
About the Muon3 tscircuit placement PCB
Muon3 tscircuit placement is an open source PCB design by muonTelescope, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 160 × 120 mm, with 25 components from 9 distinct parts.
From the project
Upadted clean sheet design
Generated by bun run export:kicad from muon3placement.tsx`.
1. Open this project to inspect recommended placement / keepouts. 2. Open ../../muon3.kicadpro (hierarchical production sheets). 3. Place production footprints using placementpositions.csv coordinates (KiCad columns), or run bun run sync:zones to stamp zone fences into the production board outline. 4. For autorouted demo nets → KiCad, run bun run autoroute then re-export.
Muon3 tscircuit placement bill of materials (BOM)
25 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | — | chip_pinrow6 | J_PANEL0, J_PANEL1, J_PANEL2, J_PANEL3 |
| 1 | — | chip_soic8 | U_BUCK33 |
| 8 | — | chip_sot23_5 | U_CMPH0, U_CMPH1, U_CMPH2, U_CMPH3, U_CMPL0, U_CMPL1, U_CMPL2, U_CMPL3 |
| 1 | — | chip_qfn48 | U_ICE40 |
| 1 | — | chip_qfn16 | U_LT3482 |
| 1 | — | chip_qfn64 | U_NRF9151 |
| 1 | — | chip_qfn56 | U_RP2040 |
| 4 | — | chip_tssop24 | U_TEC0, U_TEC1, U_TEC2, U_TEC3 |
| 4 | — | chip_dfn8 | U_TIA0, U_TIA1, U_TIA2, U_TIA3 |
Muon3 tscircuit placement design files
The KiCad project lives in the muonTelescope/muon3 repository on GitHub; these links point at the commit this page was built from.
Muon3 tscircuit placement: common questions
How big is the Muon3 tscircuit placement PCB?
The Muon3 tscircuit placement measures 160 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Muon3 tscircuit placement?
25 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Muon3 tscircuit placement design files?
From the muonTelescope/muon3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Muon3 tscircuit placement design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which muonTelescope chose for the repository.
