RC-Trace copy
About the RC-Trace copy PCB
RC-Trace copy is an open source PCB design by MustBeArt, published on GitHub. It is a 2-layer board measuring 102 × 49.9 mm, with 12 components from 6 distinct parts.
Other key parts include the 74HCT04. By type, the board carries 10 connectors, 1 IC and 1 capacitor.
It belongs with the test & measurement and retro computing designs in this gallery.
From the project
LAIR Pro -- Logic Analyzer Interface for RC-2014 Pro Bus
LAIR is an interface that makes it easy to connect a logic analyzer to the backplane bus of a RC-2014 Z80-based retro computer. The logic analyzer can capture all activity on the bus and make it available for analysis, without changing the behavior or timing of the RC-2014 system in any way.
The LAIR module plugs into the RC-2014 Backplane Pro, which includes the standard RC-2014 bus and the enhanced RC-2014 bus. It connects all the pins that are present on the Backplane Pro circuit board. All these pins are also brought out to a second set of pins to make it easy to probe the bus.
Main components on the RC-Trace copy
RC-Trace copy bill of materials (BOM)
12 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT04 | DIP-14_W7.62mm_Socket_LongPads | U1 |
| 4 | Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical_ShroudKeyed | J1, J2, J3, J4 |
| 2 | RC2014_Pro_Bus | PinHeader_RC2014_Pro | J5, J6 |
| 3 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J7, J9, J10 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | 100nF | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
RC-Trace copy design files
The KiCad project lives in the MustBeArt/LAIR repository on GitHub; these links point at the commit this page was built from.
RC-Trace copy: common questions
How big is the RC-Trace copy PCB?
The RC-Trace copy measures 102 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RC-Trace copy?
12 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the RC-Trace copy design files?
From the MustBeArt/LAIR repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RC-Trace copy design in my own project?
The repository has no license, so all rights stay with MustBeArt. Use it as a reference, and ask the author before reusing the design.
More boards in LAIR
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
Rgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0k
Analog
53.9 × 23.2 mm33 parts2LGPL-3.01.0k
Deniseadapter
26.7 × 62.2 mm16 parts2LGPL-3.01.0k