Regulator7913-1
About the Regulator7913-1 PCB
Regulator7913-1 is an open source PCB design by mwwhited, published on GitHub under the MIT license. It is a 2-layer board measuring 127.5 × 100 mm, with 34 components from 20 distinct parts.
By type, the board carries 8 diodes, 8 capacitors, 7 resistors, 3 connectors and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Collection of arduino, avr and pic projects
- KiCad - Schematic capture and PCB layout - KiBot - Automated documentation generation
Regulator7913-1 bill of materials (BOM)
34 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NPN | TO-220-3_Vertical | Q1 |
| 1 | PNP | TO-220-3_Vertical | Q2 |
| 1 | Conn_01x15_Pin | PinHeader_1x15_P2.54mm_Horizontal | J1 |
| 2 | 50Ohm | Potentiometer_Bourns_3296W_Vertical | P1, P2 |
| 1 | L7815 | TO-220-3_Vertical | I1 |
| 1 | L7915 | TO-220-3_Vertical | I2 |
| 1 | L7805 | TO-220-3_Vertical | I3 |
| 1 | LM723_DIP14 | DIP-14_W7.62mm | I4 |
| 1 | LM741 | DIP-8_W7.62mm_Socket | I5 |
| 1 | 12V .04A Inc | PinHeader_1x02_P2.54mm_Horizontal | LA1 |
| 8 | 1N4001 | D_5W_P12.70mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 3 | 2200uf | CP_Axial_L30.0mm_D15.0mm_P35.00mm_Horizontal | C1, C2, C3 |
| 4 | .1uf | CP_Radial_Tantal_D4.5mm_P5.00mm | C4, C6, C7, C8 |
| 1 | 1uf | CP_Radial_Tantal_D4.5mm_P5.00mm | C5 |
| 1 | 6.04kOhm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 1 | 2.32kOhm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 2.43kOhm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3 |
| 1 | 9.76kOhm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4 |
| 2 | 4.99kOhm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R5, R7 |
| 1 | 10Ohm | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R6 |
Regulator7913-1 design files
The KiCad project lives in the mwwhited/EmbeddedBakery repository on GitHub; these links point at the commit this page was built from.
Regulator7913-1: common questions
How big is the Regulator7913-1 PCB?
The Regulator7913-1 measures 127.5 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Regulator7913-1?
34 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Regulator7913-1 design files?
From the mwwhited/EmbeddedBakery repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Regulator7913-1 design in my own project?
Yes, under the terms of its MIT license, which mwwhited chose for the repository.
More boards in EmbeddedBakery
Simple OpAmp
306.2 × 215.1 mm173 parts2LMIT1
PROM
177.5 × 157.5 mm145 parts2LMIT1
AnalogComputer
120.7 × 80 mm109 parts4LMIT1
OperationalAmplifierExamples
35 × 63.5 mm48 parts2LMIT1
Examples
152.2 × 265.6 mm41 parts2LMIT1
AVR/ArduinoSimpleClock
215.9 × 177.8 mm31 parts2LMIT1
16bit Banked Switches
76.2 × 35.2 mm24 parts2LMIT1
AVR/ArduinoMyIOShield
128.5 × 97.1 mm24 parts2LMIT1
Wave Form Amplifier
97.5 × 47.5 mm22 parts2LMIT1
AVR/ArduinoH4n2rs485
38.1 × 44.5 mm17 parts2LMIT1
Digital Logic Board
40.5 × 41.5 mm8 parts2LMIT1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979