Psg14 emu
mykhayloscherbak·psg14aemu·hw/psg14_emu/psg14_emu.kicad_pcb
About the Psg14 emu PCB
Psg14 emu is an open source STM32 PCB design by mykhayloscherbak, published on GitHub. It is a 2-layer board measuring 50 × 70 mm, with 25 components from 11 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the LTV-847S. By type, the board carries 13 resistors, 6 connectors, 3 ICs, 2 capacitors and 1 diode.
From the project
Starter-alternater panel emulator for GTD350
Main components on the Psg14 emu
Psg14 emu bill of materials (BOM)
25 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 2 | LTV-847S | SMDIP-16_W9.53mm_Clearance8mm | U2, U3 |
| 1 | Buttons | TerminalBlock_bornier-4_P5.08mm | J1 |
| 1 | Battery | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J3 |
| 3 | Conn_01x03 | TerminalBlock_bornier-3_P5.08mm | J4, J5, J6 |
| 1 | LED_GREEN | LED_D5.0mm | D1 |
| 2 | 100nF | C_0805_HandSoldering | C1, C2 |
| 4 | 10K | R_0805_HandSoldering | R1, R2, R3, R4 |
| 1 | 68 | R_0805_HandSoldering | R5 |
| 8 | 330 | R_0805_HandSoldering | R6, R7, R8, R9, R10, R11, R12, R13 |
Psg14 emu design files
The KiCad project lives in the mykhayloscherbak/psg14aemu repository on GitHub; these links point at the commit this page was built from.
Psg14 emu: common questions
What microcontroller does the Psg14 emu use?
The Psg14 emu is built around the STM32F030F4Px, from the STM32 family.
How big is the Psg14 emu PCB?
The Psg14 emu measures 50 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Psg14 emu?
25 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psg14 emu design files?
From the mykhayloscherbak/psg14aemu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Psg14 emu design in my own project?
The repository has no license, so all rights stay with mykhayloscherbak. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Psg14 emu without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in psg14aemu
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k