LMS6002-Pmod
About the LMS6002-Pmod PCB
LMS6002-Pmod is an open source FPGA PCB design by myriadrf, published on GitHub. It is a 2-layer board measuring 76.2 × 48.8 mm, with 57 components from 29 distinct parts.
Its main chip is the iCE40_1K4K_TQ144, from the FPGA family. Other key parts include the LD6815, LTC1799 and N25Q. By type, the board carries 23 capacitors, 12 resistors, 8 connectors, 6 diodes, 4 ICs and 1 transistor.
From the project
LMS6002D Pmod compatible module
This is the repository of the Pmod™ compatible SDR board with an LMS6002 FPRF. For more information visit the website.
Main components on the LMS6002-Pmod
LMS6002-Pmod bill of materials (BOM)
57 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | iCE40_1K4K_TQ144 | TQFP-144_20x20mm_Pitch0.5mm | U1 |
| 1 | LD6815 | SOT-753_(TSOP-5)_Handsoldering | U2 |
| 1 | LTC1799 | TSOT-23_Handsoldering | U3 |
| 1 | N25Q | SOP2-8_Handsoldering | U4 |
| 1 | Q_PMOS_GSD | SOT-23_Handsoldering | Q1 |
| 1 | BARREL_JACK | BARREL_JACK | CON1 |
| 1 | FX10B_80S_8 | FX10B_80S_8 | J1 |
| 1 | Pinheader_1x6_TH | Pin_Header_Straight_1x06 | J2 |
| 1 | SELECT_DIV | Pin_Header_Straight_1x03 | J3 |
| 1 | PMOD_2x6 | Pmod | P1 |
| 1 | PMOD_2x6 | Pmod_no_header | P2 |
| 2 | Myriad_Mount_Hole | Myriad_Mount_Hole | P3, P4 |
| 1 | 2A-0603 | C_0603_HandSoldering | F1 |
| 1 | LDO_1V2_IN_SEL | Pin_Header_Straight_1x03 | JP1 |
| 1 | ICE_RESET | B3U-1000P_Handsoldering | SW1 |
| 1 | 5V-SOD-123F | SOD-123F_Handsoldering | D1 |
| 1 | Schottky 0520 | SOD-123_Handsoldering | D2 |
| 4 | LED | SMD-1206_Pol | D3, D4, D5, D6 |
| 3 | 10µF | C_0603_HandSoldering | C1, C6, C10 |
| 3 | 0.1µF | C_0603_HandSoldering | C2, C8, C12 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1µF | TantalC_SizeA_EIA-3216_HandSoldering | C3, C4 |
| 1 | 0.1µ | C_0603_HandSoldering | C5 |
| 2 | 1µF | C_0603_HandSoldering | C7, C11 |
| 2 | 0.01µF | C_0603_HandSoldering | C9, C13 |
| 10 | 100n | C_0603_HandSoldering | C14, C15, C16, C17, C18, C19, C20, C21 +2 |
| 1 | 100 | R_0603_HandSoldering | R1 |
| 4 | 10 | R_0603_HandSoldering | R2, R3, R4, R8 |
| 1 | R | R_0603_HandSoldering | R5 |
| 6 | 10k | R_0603_HandSoldering | R6, R7, R9, R10, R11, R12 |
LMS6002-Pmod design files
The KiCad project lives in the myriadrf/LMS6002-Pmod repository on GitHub; these links point at the commit this page was built from.
LMS6002-Pmod: common questions
What microcontroller does the LMS6002-Pmod use?
The LMS6002-Pmod is built around the iCE40_1K4K_TQ144, from the FPGA family.
How big is the LMS6002-Pmod PCB?
The LMS6002-Pmod measures 76.2 × 48.8 mm, has 2 copper layers and is 1 mm thick.
How many components are on the LMS6002-Pmod?
57 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the LMS6002-Pmod design files?
From the myriadrf/LMS6002-Pmod repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LMS6002-Pmod design in my own project?
The repository has no license, so all rights stay with myriadrf. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LMS6002-Pmod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
FPGAThunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
FPGAUsb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3k
FPGATomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1k
FPGAIcepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1828
FPGASd2snes
mrehkopf
101.5 × 83 mm147 partsGPL-2.0717