Sk8flair
myronww·sk8flair·hardware/LightShowEdison.kicad_pcb
About the Sk8flair PCB
Sk8flair is an open source PCB design by myronww, published on GitHub. It is a 2-layer board measuring 50 × 3 mm, with 80 components from 21 distinct parts.
Other key parts include the MICRO-B_USB, TXB0102, MCP73831, LSM9DS0 and MIC5205_3.3V. By type, the board carries 20 capacitors, 18 resistors, 12 ICs, 4 connectors, 4 diodes and 2 switches.
Main components on the Sk8flair
Sk8flair bill of materials (BOM)
80 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MICRO-B_USB | MICRO-B_USB | U1, U7 |
| 2 | TXB0102 | SMD-TXB0102-8PIN | U2, U8 |
| 2 | MCP73831 | sc70-5 | U3, U9 |
| 2 | LSM9DS0 | LGA 4x4x1 24 PIN | U4, U10 |
| 2 | MIC5205_3.3V | sc70-5 | U5, U11 |
| 2 | EDISONCONNECTOR_FULLMOUNTING_HOLES | Edison_Hirose_Connector_70_Pin | U6, U12 |
| 2 | CONN_01X02_GND | Connector_Molex_PicoBlade_53261-0271 | P1, P3 |
| 2 | CONN_01X04_GND | Connector_Molex_PicoBlade_53261-0471 | P2, P4 |
| 18 | SM_JMP | SMD_JUMPER | SJ1, SJ2, SJ3, SJ4, SJ5, SJ7, SJ8, SJ9 +10 |
| 2 | SM-SJY | SMD_Y_JUMPER | SJ6, SJ12 |
| 2 | PWR | SMT_SIDE_SLIDE_SW | SW1, SW2 |
| 2 | RED | LED-0603 | D1, D3 |
| 2 | BLUE | LED-0603 | D2, D4 |
| 6 | 4.7uF | C_0603_HandSoldering | C1, C4, C6, C11, C14, C16 |
| 6 | .1uF | C_0603_HandSoldering | C2, C3, C8, C12, C13, C18 |
| 2 | .22uF | C_0603_HandSoldering | C5, C15 |
| 4 | 1uF | C_0603_HandSoldering | C7, C9, C17, C19 |
| 2 | 10uF | C_0603_HandSoldering | C10, C20 |
| 4 | 1k | R_0603_HandSoldering | R1, R7, R8, R14 |
| 12 | 10k | R_0603_HandSoldering | R2, R3, R4, R5, R9, R10, R11, R12 +4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2k | R_0603_HandSoldering | R6, R13 |
Sk8flair design files
The KiCad project lives in the myronww/sk8flair repository on GitHub; these links point at the commit this page was built from.
Sk8flair: common questions
How big is the Sk8flair PCB?
The Sk8flair measures 50 × 3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sk8flair?
80 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sk8flair design files?
From the myronww/sk8flair repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sk8flair design in my own project?
The repository has no license, so all rights stay with myronww. Use it as a reference, and ask the author before reusing the design.