126 open source boards using the MCP73831
Real designs built with the MCP73831, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Esp8266-smartwatch
Jeija
35 × 38.4 mm59 parts2LNo license233AVR/Arduino
Xling
mcusim
35 × 47 mm60 parts2LNo license67Nordic nRF
TK44
Ladniy
290 × 99.6 mm116 parts2LCERN-OHL-P-2.045ESP32
Jig2
OpenEPaperLink
40 × 85 mm22 parts2LNo license41Nordic nRF
Carpo left
heyitscassio
126.3 × 92.7 mm64 parts2LCERN-OHL-S-2.029ESP32
Hornbill-ESP32-DEV
ExploreEmbedded
25.4 × 60.8 mm45 parts2LNo license27STM32
SC-STM32L412K8
Maniak003
31.6 × 15.1 mm69 parts2LGPL-3.026NXP
Enye mini versión A
INTI-CMNB
16.8 × 18.4 mm59 parts2LBSD-3-Clause26Bumwings v001 core
tubbytwins
369.9 × 133.2 mm138 parts2LMIT222x2
brainsmoke
50 × 50 mm36 parts2LNo license22AVR/Arduino
Divergence Meter Control Board
q61org
89 × 47 mm102 parts2LNo license21STM32
Sharp ce140f emul
ffxx68
64.4 × 42.2 mm46 parts2LNo license21AVR/Arduino
LAMEBOY
davedarko
45.7 × 67.3 mm70 parts2LNo license20STM32
Ruuvitracker hw
ruuvi
38.9 × 33.4 mm135 partsNo license14NXP
Tympan Rev E Hardware
Tympan
38 × 74 mm88 parts4LMIT14ESP8266
TyroBot
TyroElectronics
68 × 49.3 mm44 parts2LGPL-3.013ESP32
SparkFun Thing Plus ESP32-S3
sparkfun
22.9 × 58.4 mm60 parts4LMIT12AVR/Arduino
Badge2016
cryptovillage
76.2 × 76.2 mm43 parts2LNo license12STM32
PIP-WATCH ZERO
jsyk
80 × 35 mm74 parts2LNo license11NXP
Runner s-GPS
dbtayl
79.9 × 50.8 mm38 parts2LBSD-3-Clause11Cheddar
tperale
43 × 26 mm23 parts2LCC-BY-SA-4.010STM32
SDA-Wonder System Board
stanislavbrtna
61.5 × 105.3 mm86 parts2LNo license8Avionics-Board
ModelRocketryAvionics
30 × 55 mm66 parts3LNo license8AVR/Arduino
GeoFence
sparkfunX
30.5 × 66 mm60 partsNo license8Nordic nRF
ADM 52840
Atelier-Du-Maker
45 × 60 mm41 parts2LNo license8Nordic nRF
Tympan Rev F
Tympan
38 × 74 mm86 parts4LCERN-OHL-P-2.07AVR/Arduino
Esr meter
vpatkov
66 × 99.1 mm101 parts2LNo license5STM32
Ruuvilogger hw
ruuvi
38 × 15 mm93 partsNo license5ESP32
BruCONbadge2018
Jegeva
255 × 206 mm74 parts2LNo license5Raspberry Pi
BlueBerry-Zero
idlehandsdev
65 × 30 mm43 parts2LGPL-2.05Controller
fmckeogh
41.9 × 18.4 mm15 parts2LMPL-2.05Omega2-Berrydock
berryelectronics
50 × 50 mm86 parts2LNo license4PiPower v2
wyolum
56 × 56 mm81 parts2LMIT4STM32
SpyThing-Hardware
villetiukuvaara
61 × 46 mm67 parts2LGPL-3.04AVR/Arduino
LoraWAN-Stick
lostangles
124.2 × 22.9 mm33 parts2LNo license4Ghoost Board
Broccoliux
319 × 142.5 mm359 parts2LNo license3
How designs wire the MCP73831
Read from the KiCad layouts of 86 open source designs, one per repository: what each pin of the MCP73831 connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 76 of 86 designs, most often 2 kΩ (then 10 kΩ).
- The VBAT pin has a decoupling capacitor on 68 of 86 designs, most often 4.7 µF (then 10 µF).
- The VDD pin has a decoupling capacitor on 64 of 85 designs, most often 4.7 µF (then 10 µF).
- The STAT pin has a series resistor on 44 of 86 designs, most often 1 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 93% |
|
| VSSpin 2 | Connected to: GND 93% | — |
| VBATpin 3 | Connected to: VBAT 62% · a signal 37% |
|
| VDDpin 4 | Connected to: VBUS 53% · a signal 47% |
|
| PROGpin 5 | Connected to: Signal 98% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp8266-smartwatch by Jeija, Xling by mcusim, TK44 by Ladniy and Hardware mod for running OEPL on ESLs by OpenEPaperLink.
The MCP73831 in open source designs
The gallery holds 126 open source boards using the MCP73831 from 92 GitHub repositories; a typical one measures about 59 × 50 mm and carries around 60 components.
83% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Esp8266-smartwatch by Jeija.
Parts used alongside the MCP73831
Microcontrollers on boards using the MCP73831
What boards using the MCP73831 are built for
MCP73831: common questions
Where can I find a MCP73831 reference design?
Each of the 126 boards on this page is a real design using the MCP73831. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73831 PROG pin?
The PROG pin has a resistor to GND on 76 of 86 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 86 open source designs using the MCP73831.
What decoupling capacitors do designs use on the MCP73831 VBAT pin?
The VBAT pin has a decoupling capacitor on 68 of 86 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 86 open source designs using the MCP73831.
What decoupling capacitors do designs use on the MCP73831 VDD pin?
The VDD pin has a decoupling capacitor on 64 of 85 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 86 open source designs using the MCP73831.
What parts are used alongside the MCP73831?
The AP2112K-3.3, MAX17048, MICRO-B_USB, RT9080-3.3 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the MCP73831 use?
Most are built on ESP32 (26), AVR/Arduino (19), STM32 (18) and ESP8266 (8).
How big is a typical board using the MCP73831?
The median is 59 × 50 mm, and 83% are two-layer designs.
What is the most popular open source board using the MCP73831?
By GitHub stars, Esp8266-smartwatch by Jeija, with 233 stars.
Can I simulate one of these boards using the MCP73831 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.