MaltbeeController
MyTurnyet·MaltbeeController·docs/pcb/esp32-turnout-node-rev-a/esp32-turnout-node-rev-a.kicad_sch
About the MaltbeeController PCB
MaltbeeController is an open source PCB design by MyTurnyet, published on GitHub. It is a board, with 16 components from 2 distinct parts.
By type, the board carries 8 connectors and 8 resistors.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
An embedded railroad control system for model railroad panels. Two hardware targets exist: the original Arduino Mega 2560, talking directly to a Digitrax LocoNet layout, and an ESP32-based panel that talks to Loco2MQTT — a companion device that bridges the layout's LocoNet bus to
An embedded railroad control system for model railroad panels. Two hardware targets exist: the original Arduino Mega 2560, talking directly to a Digitrax LocoNet layout, and an ESP32-based panel that talks to Loco2MQTT — a companion device that bridges the layout's LocoNet bus to MQTT via its own on-device broker. Current development is focused on the ESP32 panel; see docs/superpowers/specs/ and docs/superpowers/plans/ for the full design history of every shipped sub-project.
MaltbeeController bill of materials (BOM)
16 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | Conn_01x06 | J1, J2, J3, J4, J5, J6, J7, J8 | |
| 8 | 10k | R1, R2, R3, R4, R5, R6, R7, R8 |
MaltbeeController design files
The KiCad project lives in the MyTurnyet/MaltbeeController repository on GitHub; these links point at the commit this page was built from.
MaltbeeController: common questions
How many components are on the MaltbeeController?
16 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MaltbeeController design files?
From the MyTurnyet/MaltbeeController repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.
Can I use the MaltbeeController design in my own project?
The repository has no license, so all rights stay with MyTurnyet. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k