OSL120557060
n1LS·OSL120557060·pcb/OSL120557060.kicad_pcb
About the OSL120557060 PCB
OSL120557060 is an open source AVR/Arduino PCB design by n1LS, published on GitHub. It is a 2-layer board measuring 115.6 × 108 mm, with 80 components from 13 distinct parts.
Its main chip is the ATmega328-PU, from the AVR/Arduino family. By type, the board carries 30 switches, 30 diodes, 8 resistors, 5 capacitors, 3 connectors and 1 IC.
Main components on the OSL120557060
OSL120557060 bill of materials (BOM)
80 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328-PU | DIP-28_W7.62mm | U1 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | X1 |
| 2 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J1, J2 |
| 1 | AVR-ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 30 | SW_SPST | SW_Cherry_MX_1.00u_Plate | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +22 |
| 2 | 3V6 | D_T-1_P5.08mm_Horizontal | Z1, Z2 |
| 30 | 1N4148 | D_T-1_P5.08mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +22 |
| 3 | 100n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 22p | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C6 |
| 2 | 75R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 5k1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R8, R9 |
| 1 | 1k5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
OSL120557060 design files
The KiCad project lives in the n1LS/OSL120557060 repository on GitHub; these links point at the commit this page was built from.
OSL120557060: common questions
What microcontroller does the OSL120557060 use?
The OSL120557060 is built around the ATmega328-PU, from the AVR/Arduino family.
How big is the OSL120557060 PCB?
The OSL120557060 measures 115.6 × 108 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OSL120557060?
80 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the OSL120557060 design files?
From the n1LS/OSL120557060 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OSL120557060 design in my own project?
The repository has no license, so all rights stay with n1LS. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OSL120557060 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k