OSR120557060
n1LS·OSR120557060·pcb/os-12x5-57.kicad_pcb
About the OSR120557060 PCB
OSR120557060 is an open source AVR/Arduino PCB design by n1LS, published on GitHub. It is a 2-layer board measuring 110.5 × 97.8 mm, with 89 components from 12 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 43 switches, 30 diodes, 6 capacitors, 5 resistors, 2 connectors and 1 IC.
Main components on the OSR120557060
OSR120557060 bill of materials (BOM)
89 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | 16MHz | Crystal_HC49-4H_Vertical | X1 |
| 2 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J1, J2 |
| 1 | SW_SPST | SW_SPST_B3U-1000P | RESET1 |
| 43 | SW_SPST | SW_Cherry_MX_1.00u_Plate | SW1, SW1b1, SW2, SW3, SW4, SW5, SW5b1, SW6 +35 |
| 30 | 1N4148 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +22 |
| 3 | 100n | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3 |
| 1 | 10u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 2 | 22p | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5, C6 |
| 2 | 27R | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | 4k7 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R4 |
| 1 | 10k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5 |
OSR120557060 design files
The KiCad project lives in the n1LS/OSR120557060 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/os-12x5-57.kicad_pcb
OSR120557060: common questions
What microcontroller does the OSR120557060 use?
The OSR120557060 is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the OSR120557060 PCB?
The OSR120557060 measures 110.5 × 97.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OSR120557060?
89 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the OSR120557060 design files?
From the n1LS/OSR120557060 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OSR120557060 design in my own project?
The repository has no license, so all rights stay with n1LS. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OSR120557060 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k