GBneprio
na103·GBneprio·Kicad/GBneprio/GBneprio.kicad_pcb
About the GBneprio PCB
GBneprio is an open source PCB design by na103, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 52 × 60.7 mm, with 7 components from 5 distinct parts.
Other key parts include the ATF1502AS-10AU44 and M29F160FT55N3E2. By type, the board carries 3 capacitors, 2 ICs, 1 connector and 1 switch.
It belongs with the retro computing and usb & debug tools designs in this gallery.
From the project
DMG/GBC 2MB Flash Cart
Please note that the PCB thickness must be 0.8mm. In the PCB Assembly folder, you can find the BOM and CPL files for production and assembly with JLCPCB. To program the CPLD, you will need a compatible JTAG programmer (e.g., Atmel ATDH1150USB) and the SKEDD connector from Wurth Elektronik (code 490107671012). When programming the CPLD from the JTAG connector, you must supply the board with 5V separately.

Main components on the GBneprio
GBneprio bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATF1502AS-10AU44 | QFP80P1200X1200X120-44N | U1 |
| 1 | M29F160FT55N3E2 | SOP50P2000X120-48N | U2 |
| 1 | Cartridge_Bus | GB_Cartridge | J1 |
| 1 | 490107671012 ATMEL JTAG SKEDD | 490107671012 | S1 |
| 3 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
GBneprio design files
The KiCad project lives in the na103/GBneprio repository on GitHub; these links point at the commit this page was built from.
GBneprio: common questions
How big is the GBneprio PCB?
The GBneprio measures 52 × 60.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GBneprio?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GBneprio design files?
From the na103/GBneprio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GBneprio design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k