HardLabs

2022NHK Relay

nalinally·robocon·2022NHK/circuits/robot/2022NHK_Relay/2022NHK_Relay.kicad_pcb

2022NHK Relay PCB layout, top view — open source board by nalinally

About the 2022NHK Relay PCB

2022NHK Relay is an open source PCB design by nalinally, published on GitHub. It is a 2-layer board measuring 24.1 × 28.3 mm, with 3 components from 3 distinct parts.

Other key parts include the tb1-160. By type, the board carries 1 IC, 1 connector and 1 diode.

From the project

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

・2022NHK_Include ... メイン基板です メイン基板は3枚ありますが全部これです

・2022NHK_Convert ... サーボ用の信号線(6V)を5Vに変換します

・2022NHK_Relay ... 遠隔非常停止(受信側)のリレーを取り換え可能な感じにしました そのためにリレーをdip化したやつです

・2022NHK_Source ... Tコネクタからの電源を5Vに降圧してUSB電源にします。各1.5Aずつしか流せないので注意

・2022NHKXBeeVer2 ... ロボットに乗せる遠隔非常停止(受信側) フォトカプラでリレーを駆動してます 当社比一番かっこいい回路

Main components on the 2022NHK Relay

tb1-160

2022NHK Relay bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
tb1-160
U1
1
Conn_02x10_Odd_Even
J1
1
D
D1

2022NHK Relay design files

The KiCad project lives in the nalinally/robocon repository on GitHub; these links point at the commit this page was built from.

2022NHK Relay: common questions

How big is the 2022NHK Relay PCB?

The 2022NHK Relay measures 24.1 × 28.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2022NHK Relay?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2022NHK Relay design files?

From the nalinally/robocon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 2022NHK Relay design in my own project?

The repository has no license, so all rights stay with nalinally. Use it as a reference, and ask the author before reusing the design.

More boards in robocon