HardLabs

2022NHK Switch

nalinally·robocon·2022NHK/circuits/robot/2022NHK_Switch/2022NHK_Switch.kicad_pcb

2022NHK Switch PCB layout, top view — open source board by nalinally
Simulate this board

About the 2022NHK Switch PCB

2022NHK Switch is an open source PCB design by nalinally, published on GitHub. It is a 2-layer board measuring 16.8 × 21.7 mm, with 7 components from 4 distinct parts.

By type, the board carries 2 switches, 2 diodes, 2 resistors and 1 connector.

From the project

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

・2022NHK_Include ... メイン基板です メイン基板は3枚ありますが全部これです

・2022NHK_Convert ... サーボ用の信号線(6V)を5Vに変換します

・2022NHK_Relay ... 遠隔非常停止(受信側)のリレーを取り換え可能な感じにしました そのためにリレーをdip化したやつです

・2022NHK_Source ... Tコネクタからの電源を5Vに降圧してUSB電源にします。各1.5Aずつしか流せないので注意

・2022NHKXBeeVer2 ... ロボットに乗せる遠隔非常停止(受信側) フォトカプラでリレーを駆動してます 当社比一番かっこいい回路

2022NHK Switch bill of materials (BOM)

7 components, 4 distinct parts.

QtyPartRefs
1
Conn_01x04_Male
J1
2
SW_DPDT_x2
SW1, SW2
2
LED
D1, D2
2
R
R1, R2

2022NHK Switch design files

The KiCad project lives in the nalinally/robocon repository on GitHub; these links point at the commit this page was built from.

2022NHK Switch: common questions

How big is the 2022NHK Switch PCB?

The 2022NHK Switch measures 16.8 × 21.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2022NHK Switch?

7 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2022NHK Switch design files?

From the nalinally/robocon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 2022NHK Switch design in my own project?

The repository has no license, so all rights stay with nalinally. Use it as a reference, and ask the author before reusing the design.

More boards in robocon