2022NHK XBee ver2

nalinally·robocon·2022NHK/circuits/robot/2022NHK_XBee_ver2/2022NHK_XBee_ver2.kicad_pcb

2022NHK XBee ver2 PCB layout, top view — open source board by nalinally

Simulate this board

About the 2022NHK XBee ver2 PCB

2022NHK XBee ver2 is an open source PCB design by nalinally, published on GitHub. It is a 2-layer board measuring 100 × 91.7 mm, with 20 components from 11 distinct parts.

Other key parts include the NUCLEO-F303K8, TLP627-2, xbeepros1 and L7805. By type, the board carries 8 connectors, 5 ICs, 4 resistors and 2 capacitors.

From the project

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

たぶんいらないファイル(発注するために生成したやつとか)がたくさん入ってて見にくくてすみません

・2022NHK_Include ... メイン基板ですメイン基板は3枚ありますが全部これです

・2022NHK_Convert ... サーボ用の信号線(6V)を5Vに変換します

・2022NHK_Relay ... 遠隔非常停止(受信側)のリレーを取り換え可能な感じにしましたそのためにリレーをdip化したやつです

・2022NHK_Source ... Tコネクタからの電源を5Vに降圧してUSB電源にします。各1.5Aずつしか流せないので注意

・2022NHKXBeeVer2 ... ロボットに乗せる遠隔非常停止(受信側) フォトカプラでリレーを駆動してます当社比一番かっこいい回路

Main components on the 2022NHK XBee ver2

NUCLEO-F303K8 TLP627-2 xbeepros1 L7805

2022NHK XBee ver2 bill of materials (BOM)

20 components, 11 distinct parts.

Qty	Part	Footprint	Refs
1	NUCLEO-F303K8	NUCLEO-F303K8	IC1
2	TLP627-2	DIP-8_W7.62mm	U1, U2
1	xbeepros1	xbee_pro_s1	U5
1	L7805	TO-220F-3_Vertical	U6
4	Conn_02x10_Odd_Even	PinSocket_2x10_P2.54mm_Vertical	J1, J2, J3, J4
2	Conn_01x02_Male	Connector_T_Male	J5, J6
2	Conn_01x02_Female	Connector_T_Female	J7, J8
1	Heatsink	Heatsink1	HS1
1	CP1	CP_Radial_D6.3mm_P2.50mm	C1
1	C	C_Disc_D4.7mm_W2.5mm_P5.00mm	C2
4	R	R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal	R1, R2, R3, R4

2022NHK XBee ver2 design files

The KiCad project lives in the nalinally/robocon repository on GitHub; these links point at the commit this page was built from.

Layout2022NHK/circuits/robot/2022NHK_XBee_ver2/2022NHK_XBee_ver2.kicad_pcb

2022NHK XBee ver2: common questions

How big is the 2022NHK XBee ver2 PCB?

The 2022NHK XBee ver2 measures 100 × 91.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2022NHK XBee ver2?

20 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2022NHK XBee ver2 design files?

From the nalinally/robocon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 2022NHK XBee ver2 design in my own project?

The repository has no license, so all rights stay with nalinally. Use it as a reference, and ask the author before reusing the design.

More boards in robocon